LM2901VDG vs LM2901DG Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM2901VDG disebabkan oleh onsemi dan LM2901DG disebabkan oleh onsemi. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LM2901VDG | LM2901DG |
|---|---|---|
| Merek | onsemi | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | General-purpose differential comparator | General Purpose |
| Number of Channels | 4 channels | — |
| Single-Supply Voltage Range | 3 V to 36 V | 3 V to 36 V |
| Dual-Supply Voltage Range | ±1.5 V to ±18 V | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | 30 V | — |
| Jenis Output | Open-collector, CMOS and TTL compatible | Open Collector |
| Input Offset Voltage | 2 mV | — |
| Input Bias Current | 25 nA | — |
| Supply-Current Drain | 0.8 mA typical | — |
| Gambaran Suhu Operasi | -40°C to +125°C | -40°C to +105°C |
| Kemasan | 14-SOIC, 0.154 inch / 3.90 mm width | 14-SOIC |
| Jenis Pemasangan | Surface mount | Surface Mount |
| Manufacturer Description | Single-supply quad comparator | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | — |
| Response Time | [DATA_NEEDED: comparator response time] | 1.3 us |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Number of Comparators | — | 4 |
| Output Compatibility | — | CMOS, TTL |
| Arus Pemberi Arus | — | 1 mA |
| Maximum Input Bias Current | — | 0.25 uA at 5 V |
| Typical Low Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | ±5 nA |
| Typical Low Output Saturation Voltage | — | 130 mV at 4 mA |