LM2902KAVQPWREP vs LM2902KAVQPWR Comparison

Detailed side-by-side comparison of LM2902KAVQPWREP by Texas Instruments and LM2902KAVQPWR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
LM2902KAVQPWREP LM2902KAVQPWREP - Quad 26V 1.2MHz Op Amp | Texas Instruments

LM2902KAVQPWREP - Quad 26V 1.2MHz Op Amp | Texas Instruments

LM2902KAVQPWREP ✓ Active
Texas Instruments
LM2902KAVQPWR LM2902KAVQPWR - 30V Quad Op Amp with 2kV ESD | Texas Instruments

LM2902KAVQPWR - 30V Quad Op Amp with 2kV ESD | Texas Instruments

LM2902KAVQPWR ✓ Active

Specification Comparison

Parameter LM2902KAVQPWREP LM2902KAVQPWR
Brand Texas Instruments Texas Instruments
Category Amplifier ICs Amplifier ICs
Lifecycle Status Active Active
Amplifier Type Quad general-purpose operational amplifier General-purpose operational amplifier
Number of Amplifier Circuits 4 circuits —
Maximum Supply Voltage 26 V —
Gain-Bandwidth Product 1.2 MHz 1.2 MHz
Input Offset Voltage 2 mV 2 mV maximum for BA version; 600 uV typical for family
ESD Protection 2 kV 2 kV for K-suffix devices
Operating Temperature Range -40°C to 125°C —
Package 14-pin TSSOP (PW) 14-pin TSSOP
Package Width 4.40 mm —
Mounting Type Surface mount Surface mount
Product Type Enhanced-product operational amplifier —
Compensation Internally frequency compensated —
Common-Mode Input [DATA_NEEDED: common-mode input voltage range] —
Output Swing [DATA_NEEDED: output voltage swing] Near supply rails; exact limits not stated
Output Current [DATA_NEEDED: output current] —
Input Bias Current [DATA_NEEDED: input bias current] —
Slew Rate [DATA_NEEDED: slew rate] —
Differential Gain [DATA_NEEDED: differential gain] —
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
RoHS Status [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
Lead-Free Status [DATA_NEEDED: lead-free status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] not stated
Number of Amplifiers — 4 circuits
Single-Supply Operating Range — Up to 26 V
Dual-Supply Operating Range — Plus-and-minus 13 V
B/BA Version Supply Range — 3 V to 36 V
Supply-Current Drain — 0.8 mA typical
Common-Mode Input Voltage — Range includes ground
Differential Input Voltage Capability — Supported; rating not stated
Lead Pitch — 0.65 mm nominal
Automotive-Grade Variant — LM2902KVQPWRQ1 identified as a separate ordering option

Datasheets & Resources

Browse All Products Create BOM Request Quote