LM2902KAVQPWREP vs LM2902KAVQPWR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LM2902KAVQPWREP بواسطة Texas Instruments و LM2902KAVQPWR بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
LM2902KAVQPWREP - Quad 26V 1.2MHz Op Amp | Texas Instruments
LM2902KAVQPWREP ✓ نشطTexas Instruments
LM2902KAVQPWR - 30V Quad Op Amp with 2kV ESD | Texas Instruments
LM2902KAVQPWR ✓ نشطمقارنة المواصفات
| المعامل | LM2902KAVQPWREP | LM2902KAVQPWR |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Amplifier Type | Quad general-purpose operational amplifier | General-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits | — |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Input Offset Voltage | 2 mV | 2 mV maximum for BA version; 600 uV typical for family |
| ESD Protection | 2 kV | 2 kV for K-suffix devices |
| نطاق درجة حرارة التشغيل | -40°C to 125°C | — |
| العلبة | 14-pin TSSOP (PW) | 14-pin TSSOP |
| Package Width | 4.40 mm | — |
| نوع التركيب | Surface mount | Surface mount |
| Product Type | Enhanced-product operational amplifier | — |
| Compensation | Internally frequency compensated | — |
| Common-Mode Input | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | Near supply rails; exact limits not stated |
| Output Current | [DATA_NEEDED: output current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Differential Gain | [DATA_NEEDED: differential gain] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | not stated |
| Number of Amplifiers | — | 4 circuits |
| Single-Supply Operating Range | — | Up to 26 V |
| Dual-Supply Operating Range | — | Plus-and-minus 13 V |
| B/BA Version Supply Range | — | 3 V to 36 V |
| Supply-Current Drain | — | 0.8 mA typical |
| Common-Mode Input Voltage | — | Range includes ground |
| Differential Input Voltage Capability | — | Supported; rating not stated |
| Lead Pitch | — | 0.65 mm nominal |
| Automotive-Grade Variant | — | LM2902KVQPWRQ1 identified as a separate ordering option |