LM2902KAVQPWREP vs LM2902KAVQPWR Comparaison

Comparaison détaillée côte à côte de LM2902KAVQPWREP par Texas Instruments et LM2902KAVQPWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM2902KAVQPWREP LM2902KAVQPWREP - Quad 26V 1.2MHz Op Amp | Texas Instruments

LM2902KAVQPWREP - Quad 26V 1.2MHz Op Amp | Texas Instruments

LM2902KAVQPWREP ✓ Actif
Texas Instruments
LM2902KAVQPWR LM2902KAVQPWR - 30V Quad Op Amp with 2kV ESD | Texas Instruments

LM2902KAVQPWR - 30V Quad Op Amp with 2kV ESD | Texas Instruments

LM2902KAVQPWR ✓ Actif

Comparaison des spécifications

Paramètre LM2902KAVQPWREP LM2902KAVQPWR
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Amplifier Type Quad general-purpose operational amplifier General-purpose operational amplifier
Number of Amplifier Circuits 4 circuits —
Maximum Supply Voltage 26 V —
Gain-Bandwidth Product 1.2 MHz 1.2 MHz
Input Offset Voltage 2 mV 2 mV maximum for BA version; 600 uV typical for family
ESD Protection 2 kV 2 kV for K-suffix devices
Plage de température de fonctionnement -40°C to 125°C —
Boîtier 14-pin TSSOP (PW) 14-pin TSSOP
Package Width 4.40 mm —
Type de montage Surface mount Surface mount
Product Type Enhanced-product operational amplifier —
Compensation Internally frequency compensated —
Common-Mode Input [DATA_NEEDED: common-mode input voltage range] —
Output Swing [DATA_NEEDED: output voltage swing] Near supply rails; exact limits not stated
Output Current [DATA_NEEDED: output current] —
Input Bias Current [DATA_NEEDED: input bias current] —
Slew Rate [DATA_NEEDED: slew rate] —
Differential Gain [DATA_NEEDED: differential gain] —
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
Statut RoHS [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
Lead-Free Status [DATA_NEEDED: lead-free status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] not stated
Number of Amplifiers — 4 circuits
Single-Supply Operating Range — Up to 26 V
Dual-Supply Operating Range — Plus-and-minus 13 V
B/BA Version Supply Range — 3 V to 36 V
Supply-Current Drain — 0.8 mA typical
Common-Mode Input Voltage — Range includes ground
Differential Input Voltage Capability — Supported; rating not stated
Lead Pitch — 0.65 mm nominal
Automotive-Grade Variant — LM2902KVQPWRQ1 identified as a separate ordering option

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis