LM2902KAVQPWREP vs LM2902KAVQPWR So sánh
So sánh chi tiết song song của LM2902KAVQPWREP bằng Texas Instruments và LM2902KAVQPWR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2902KAVQPWREP - Quad 26V 1.2MHz Op Amp | Texas Instruments
LM2902KAVQPWREP ✓ Hoạt độngTexas Instruments
LM2902KAVQPWR - 30V Quad Op Amp with 2kV ESD | Texas Instruments
LM2902KAVQPWR ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2902KAVQPWREP | LM2902KAVQPWR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Amplifier Type | Quad general-purpose operational amplifier | General-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits | — |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Input Offset Voltage | 2 mV | 2 mV maximum for BA version; 600 uV typical for family |
| ESD Protection | 2 kV | 2 kV for K-suffix devices |
| Khoảng nhiệt độ hoạt động | -40°C to 125°C | — |
| Hộp | 14-pin TSSOP (PW) | 14-pin TSSOP |
| Package Width | 4.40 mm | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Product Type | Enhanced-product operational amplifier | — |
| Compensation | Internally frequency compensated | — |
| Common-Mode Input | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | Near supply rails; exact limits not stated |
| Output Current | [DATA_NEEDED: output current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Differential Gain | [DATA_NEEDED: differential gain] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | not stated |
| Number of Amplifiers | — | 4 circuits |
| Single-Supply Operating Range | — | Up to 26 V |
| Dual-Supply Operating Range | — | Plus-and-minus 13 V |
| B/BA Version Supply Range | — | 3 V to 36 V |
| Supply-Current Drain | — | 0.8 mA typical |
| Common-Mode Input Voltage | — | Range includes ground |
| Differential Input Voltage Capability | — | Supported; rating not stated |
| Lead Pitch | — | 0.65 mm nominal |
| Automotive-Grade Variant | — | LM2902KVQPWRQ1 identified as a separate ordering option |