LM2903QDG4 vs LM2903QDRG4Q1 Comparison
Detailed side-by-side comparison of LM2903QDG4 by Texas Instruments and LM2903QDRG4Q1 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ ActiveSpecification Comparison
| Parameter | LM2903QDG4 | LM2903QDRG4Q1 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Comparator Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Output Type | Open-collector | Open-collector |
| Logic Compatibility | TTL, CMOS, and MOS compatible | — |
| Differential Input Type | Differential | — |
| Operating Temperature Range | -40 °C to 125 °C | -40°C to +125°C |
| Package | 8-pin SOIC, 3.90 mm width | 8-SOIC (D), 8 pins |
| Mounting Type | Surface mount | Surface mount |
| Single-Supply Operation | Supported | 2 V to 36 V |
| Dual-Supply Operation | Supported | — |
| Independent Comparators | 2 independent channels | — |
| Differential Input Voltage Range | ±36 V | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | AEC-Q100 Grade 0 and 1 |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Standard Tape-and-Reel Quantity | [DATA_NEEDED: standard tape-and-reel quantity] | — |
| Number of Channels | — | 2 channels |
| Dual Supply Range | — | ±1 V to ±18 V |
| Maximum Input Offset Voltage | — | 7 mV at 5 V |
| Maximum Input Bias Current | — | 0.25 µA |
| Typical Output Current | — | 20 mA |
| Maximum Quiescent Current | — | 2.5 mA |
| Package Width | — | 3.90 mm |
| Package Length | — | 0.154 inch |
| Minimum Supply Difference in Dual Operation | — | 2 V |
| Minimum VCC Margin for Dual-Supply Operation | — | 1.5 V |
| ESD Qualification | — | 2 kV ESD performance |