LM2903QDG4 vs LM2903QDRG4Q1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM2903QDG4 disebabkan oleh Texas Instruments dan LM2903QDRG4Q1 disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ AktifPengandingan Spesifikasi
| Parametr | LM2903QDG4 | LM2903QDRG4Q1 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Comparator Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Jenis Output | Open-collector | Open-collector |
| Logic Compatibility | TTL, CMOS, and MOS compatible | — |
| Differential Input Type | Differential | — |
| Gambaran Suhu Operasi | -40 °C to 125 °C | -40°C to +125°C |
| Kemasan | 8-pin SOIC, 3.90 mm width | 8-SOIC (D), 8 pins |
| Jenis Pemasangan | Surface mount | Surface mount |
| Single-Supply Operation | Supported | 2 V to 36 V |
| Dual-Supply Operation | Supported | — |
| Independent Comparators | 2 independent channels | — |
| Differential Input Voltage Range | ±36 V | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | AEC-Q100 Grade 0 and 1 |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Standard Tape-and-Reel Quantity | [DATA_NEEDED: standard tape-and-reel quantity] | — |
| Number of Channels | — | 2 channels |
| Dual Supply Range | — | ±1 V to ±18 V |
| Maximum Input Offset Voltage | — | 7 mV at 5 V |
| Maximum Input Bias Current | — | 0.25 µA |
| Typical Output Current | — | 20 mA |
| Maximum Quiescent Current | — | 2.5 mA |
| Package Width | — | 3.90 mm |
| Package Length | — | 0.154 inch |
| Minimum Supply Difference in Dual Operation | — | 2 V |
| Minimum VCC Margin for Dual-Supply Operation | — | 1.5 V |
| ESD Qualification | — | 2 kV ESD performance |