LM2903QDG4 vs LM2903QDRG4Q1 Comparaison
Comparaison détaillée côte à côte de LM2903QDG4 par Texas Instruments et LM2903QDRG4Q1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ ActifComparaison des spécifications
| Paramètre | LM2903QDG4 | LM2903QDRG4Q1 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Comparator Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Type de sortie | Open-collector | Open-collector |
| Logic Compatibility | TTL, CMOS, and MOS compatible | — |
| Differential Input Type | Differential | — |
| Plage de température de fonctionnement | -40 °C to 125 °C | -40°C to +125°C |
| Boîtier | 8-pin SOIC, 3.90 mm width | 8-SOIC (D), 8 pins |
| Type de montage | Surface mount | Surface mount |
| Single-Supply Operation | Supported | 2 V to 36 V |
| Dual-Supply Operation | Supported | — |
| Independent Comparators | 2 independent channels | — |
| Differential Input Voltage Range | ±36 V | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | AEC-Q100 Grade 0 and 1 |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Standard Tape-and-Reel Quantity | [DATA_NEEDED: standard tape-and-reel quantity] | — |
| Number of Channels | — | 2 channels |
| Dual Supply Range | — | ±1 V to ±18 V |
| Maximum Input Offset Voltage | — | 7 mV at 5 V |
| Maximum Input Bias Current | — | 0.25 µA |
| Typical Output Current | — | 20 mA |
| Maximum Quiescent Current | — | 2.5 mA |
| Package Width | — | 3.90 mm |
| Package Length | — | 0.154 inch |
| Minimum Supply Difference in Dual Operation | — | 2 V |
| Minimum VCC Margin for Dual-Supply Operation | — | 1.5 V |
| ESD Qualification | — | 2 kV ESD performance |