LM2903QDG4 vs LM2903QDRG4Q1 比較
詳細並排比較 LM2903QDG4 由 Texas Instruments 與 LM2903QDRG4Q1 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ 啟用中規格比較
| 參數 | LM2903QDG4 | LM2903QDRG4Q1 |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Comparator Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| 輸出類型 | Open-collector | Open-collector |
| Logic Compatibility | TTL, CMOS, and MOS compatible | — |
| Differential Input Type | Differential | — |
| 工作溫度範圍 | -40 °C to 125 °C | -40°C to +125°C |
| 封裝 | 8-pin SOIC, 3.90 mm width | 8-SOIC (D), 8 pins |
| 安裝類型 | Surface mount | Surface mount |
| Single-Supply Operation | Supported | 2 V to 36 V |
| Dual-Supply Operation | Supported | — |
| Independent Comparators | 2 independent channels | — |
| Differential Input Voltage Range | ±36 V | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | AEC-Q100 Grade 0 and 1 |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Standard Tape-and-Reel Quantity | [DATA_NEEDED: standard tape-and-reel quantity] | — |
| Number of Channels | — | 2 channels |
| Dual Supply Range | — | ±1 V to ±18 V |
| Maximum Input Offset Voltage | — | 7 mV at 5 V |
| Maximum Input Bias Current | — | 0.25 µA |
| Typical Output Current | — | 20 mA |
| Maximum Quiescent Current | — | 2.5 mA |
| Package Width | — | 3.90 mm |
| Package Length | — | 0.154 inch |
| Minimum Supply Difference in Dual Operation | — | 2 V |
| Minimum VCC Margin for Dual-Supply Operation | — | 1.5 V |
| ESD Qualification | — | 2 kV ESD performance |