LT1007ACP vs LT1007CH Comparison
Detailed side-by-side comparison of LT1007ACP by Texas Instruments and LT1007CH by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LT1007ACP | LT1007CH |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Unknown | Active |
| Product Type | Low-noise, high-speed, precision operational amplifier | — |
| Number of Amplifiers | 1 amplifier | — |
| Package | 8-pin PDIP | TO-5 |
| Maximum Equivalent Input Noise Voltage | 3.8 nV/sqrt(Hz) at 1 kHz | — |
| Equivalent Input Noise Voltage | 4.5 nV/sqrt(Hz) at 10 Hz | — |
| Low Peak-to-Peak Equivalent Input Noise Voltage | 60 nV typical from 10 Hz | — |
| Typical Input Offset Voltage | 10 uV | — |
| Input Voltage Drift | 0.2 uV/degree C | — |
| Common-Mode Rejection | 130 dB | 130 dB |
| Power-Supply Rejection | 130 dB | 130 dB |
| Gain-Bandwidth Product | 60 MHz on the decompensated LT1037 | [DATA_NEEDED: LT1007 gain-bandwidth product] |
| Typical Differential Voltage Gain | 20 V/uV at 25 degrees C with a 2 kOhm load to plus or minus 12 V | — |
| Minimum Slew Rate | 11 V/us for LT1037 and LT1037A versions | — |
| Mounting Type | Through-hole | Through-hole |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage | [DATA_NEEDED: supply voltage range] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Amplifier Type | — | Single low-noise, high-speed precision operational amplifier |
| Circuit Count | — | 1 circuit |
| Wideband Input Noise | — | 2.5 nV/√Hz |
| Guaranteed Noise at 10 Hz | — | 4.5 nV/√Hz |
| Guaranteed Noise at 1 kHz | — | 3.8 nV/√Hz |
| Low-Frequency Peak-to-Peak Noise | — | 60 nV peak-to-peak from 0.1 Hz to 10 Hz |
| 1/f Corner Frequency | — | 2 Hz |
| Input Offset Voltage | — | 10 µV |
| Input Offset Voltage Drift | — | 0.2 µV/°C |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |