LT1007ACP vs LT1007CH Comparación

Comparación detallada lado a lado de LT1007ACP por Texas Instruments y LT1007CH por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

Analog Devices
LT1007CH LT1007CH - Low-Noise Precision Op Amp | Analog Devices

LT1007CH - Low-Noise Precision Op Amp | Analog Devices

LT1007CH ✓ Activo

Comparación de especificaciones

Parámetro LT1007ACP LT1007CH
Marca Texas Instruments Analog Devices
Categoría Amplifier ICs Amplifier ICs
Estado del ciclo de vida Unknown Activo
Product Type Low-noise, high-speed, precision operational amplifier —
Number of Amplifiers 1 amplifier —
Encapsulado 8-pin PDIP TO-5
Maximum Equivalent Input Noise Voltage 3.8 nV/sqrt(Hz) at 1 kHz —
Equivalent Input Noise Voltage 4.5 nV/sqrt(Hz) at 10 Hz —
Low Peak-to-Peak Equivalent Input Noise Voltage 60 nV typical from 10 Hz —
Typical Input Offset Voltage 10 uV —
Input Voltage Drift 0.2 uV/degree C —
Common-Mode Rejection 130 dB 130 dB
Power-Supply Rejection 130 dB 130 dB
Gain-Bandwidth Product 60 MHz on the decompensated LT1037 [DATA_NEEDED: LT1007 gain-bandwidth product]
Typical Differential Voltage Gain 20 V/uV at 25 degrees C with a 2 kOhm load to plus or minus 12 V —
Minimum Slew Rate 11 V/us for LT1037 and LT1037A versions —
Tipo de montaje Through-hole Through-hole
Temperatura de funcionamiento [DATA_NEEDED: operating temperature range] —
Tensión de alimentación [DATA_NEEDED: supply voltage range] —
Estado RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Amplifier Type — Single low-noise, high-speed precision operational amplifier
Circuit Count — 1 circuit
Wideband Input Noise — 2.5 nV/√Hz
Guaranteed Noise at 10 Hz — 4.5 nV/√Hz
Guaranteed Noise at 1 kHz — 3.8 nV/√Hz
Low-Frequency Peak-to-Peak Noise — 60 nV peak-to-peak from 0.1 Hz to 10 Hz
1/f Corner Frequency — 2 Hz
Input Offset Voltage — 10 µV
Input Offset Voltage Drift — 0.2 µV/°C
Rango de temperatura de funcionamiento — [DATA_NEEDED: operating temperature range]
Supply Voltage Range — [DATA_NEEDED: supply voltage range]
Input Bias Current — [DATA_NEEDED: input bias current]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización