LT1007ACP vs LT1007CH Comparaison

Comparaison détaillée côte à côte de LT1007ACP par Texas Instruments et LT1007CH par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
LT1007CH LT1007CH - Low-Noise Precision Op Amp | Analog Devices

LT1007CH - Low-Noise Precision Op Amp | Analog Devices

LT1007CH ✓ Actif

Comparaison des spécifications

Paramètre LT1007ACP LT1007CH
Marque Texas Instruments Analog Devices
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Unknown Actif
Product Type Low-noise, high-speed, precision operational amplifier —
Number of Amplifiers 1 amplifier —
Boîtier 8-pin PDIP TO-5
Maximum Equivalent Input Noise Voltage 3.8 nV/sqrt(Hz) at 1 kHz —
Equivalent Input Noise Voltage 4.5 nV/sqrt(Hz) at 10 Hz —
Low Peak-to-Peak Equivalent Input Noise Voltage 60 nV typical from 10 Hz —
Typical Input Offset Voltage 10 uV —
Input Voltage Drift 0.2 uV/degree C —
Common-Mode Rejection 130 dB 130 dB
Power-Supply Rejection 130 dB 130 dB
Gain-Bandwidth Product 60 MHz on the decompensated LT1037 [DATA_NEEDED: LT1007 gain-bandwidth product]
Typical Differential Voltage Gain 20 V/uV at 25 degrees C with a 2 kOhm load to plus or minus 12 V —
Minimum Slew Rate 11 V/us for LT1037 and LT1037A versions —
Type de montage Through-hole Through-hole
Température de fonctionnement [DATA_NEEDED: operating temperature range] —
Tension d'alimentation [DATA_NEEDED: supply voltage range] —
Statut RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Amplifier Type — Single low-noise, high-speed precision operational amplifier
Circuit Count — 1 circuit
Wideband Input Noise — 2.5 nV/√Hz
Guaranteed Noise at 10 Hz — 4.5 nV/√Hz
Guaranteed Noise at 1 kHz — 3.8 nV/√Hz
Low-Frequency Peak-to-Peak Noise — 60 nV peak-to-peak from 0.1 Hz to 10 Hz
1/f Corner Frequency — 2 Hz
Input Offset Voltage — 10 µV
Input Offset Voltage Drift — 0.2 µV/°C
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]
Supply Voltage Range — [DATA_NEEDED: supply voltage range]
Input Bias Current — [DATA_NEEDED: input bias current]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis