LT1007ACP vs LT1007CH Vergleich
Detaillierter Direktvergleich von LT1007ACP von Texas Instruments und LT1007CH von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LT1007ACP | LT1007CH |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Unknown | Aktiv |
| Product Type | Low-noise, high-speed, precision operational amplifier | — |
| Number of Amplifiers | 1 amplifier | — |
| Gehäuse | 8-pin PDIP | TO-5 |
| Maximum Equivalent Input Noise Voltage | 3.8 nV/sqrt(Hz) at 1 kHz | — |
| Equivalent Input Noise Voltage | 4.5 nV/sqrt(Hz) at 10 Hz | — |
| Low Peak-to-Peak Equivalent Input Noise Voltage | 60 nV typical from 10 Hz | — |
| Typical Input Offset Voltage | 10 uV | — |
| Input Voltage Drift | 0.2 uV/degree C | — |
| Common-Mode Rejection | 130 dB | 130 dB |
| Power-Supply Rejection | 130 dB | 130 dB |
| Gain-Bandwidth Product | 60 MHz on the decompensated LT1037 | [DATA_NEEDED: LT1007 gain-bandwidth product] |
| Typical Differential Voltage Gain | 20 V/uV at 25 degrees C with a 2 kOhm load to plus or minus 12 V | — |
| Minimum Slew Rate | 11 V/us for LT1037 and LT1037A versions | — |
| Montageart | Through-hole | Through-hole |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| Versorgungsspannung | [DATA_NEEDED: supply voltage range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Amplifier Type | — | Single low-noise, high-speed precision operational amplifier |
| Circuit Count | — | 1 circuit |
| Wideband Input Noise | — | 2.5 nV/√Hz |
| Guaranteed Noise at 10 Hz | — | 4.5 nV/√Hz |
| Guaranteed Noise at 1 kHz | — | 3.8 nV/√Hz |
| Low-Frequency Peak-to-Peak Noise | — | 60 nV peak-to-peak from 0.1 Hz to 10 Hz |
| 1/f Corner Frequency | — | 2 Hz |
| Input Offset Voltage | — | 10 µV |
| Input Offset Voltage Drift | — | 0.2 µV/°C |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |