LT1102CH vs LT1102ACH Comparison
Detailed side-by-side comparison of LT1102CH by Analog Devices and LT1102ACH by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LT1102CH | LT1102ACH |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Obsolete |
| Product Type | Instrumentation Amplifier, JFET input | Single-circuit instrumentation amplifier |
| Number of Channels | 1 | — |
| Internal Gain Options | 10 or 100 (fixed) | — |
| Gain Accuracy | 0.01% | 0.01% |
| Non-Linearity | 3 ppm | — |
| Input Offset Voltage | 180 uV | 180 µV |
| Input Bias Current | < 10 pA | <10 pA |
| Input Offset Current | < 10 pA | — |
| Supply Voltage Range (differential) | +/-9 V to +/-20 V | — |
| Typical Dual Supply Rails | +/-12 V, +/-15 V, +/-18 V | — |
| Package | TO-5, 8-lead hermetic metal can (CH) | TO-5 metal can, 8 pins |
| Mounting Type | Through-hole, hermetic sealed | Through-hole |
| External Gain-Setting Resistor Required | No | — |
| Input Stage Topology | FET (JFET) differential input | — |
| Common-Mode Rejection | [DATA_NEEDED: CMRR] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 30 V/µs |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | [DATA_NEEDED: gain-bandwidth product] |
| Settling Time | [DATA_NEEDED: settling time] | [DATA_NEEDED: settling time] |
| Overdrive Recovery Time | [DATA_NEEDED: overdrive recovery time] | [DATA_NEEDED: overdrive recovery time] |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Supply Current per Amplifier | [DATA_NEEDED: supply current] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range for LT1102CH] | [DATA_NEEDED: operating temperature range] |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Input Transistor Technology | — | JFET input |
| Fixed Gain Options | — | 10 or 100 V/V |
| Nonlinearity | — | 3 ppm |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Pin Count | — | 8 pins |
| External Gain-Setting Resistor | — | Not required |
| Output Offset Voltage Contribution | — | None |
| Input Bias Current Temperature Behavior | — | Does not double for each 10°C temperature increase |
| REACH Status | — | [DATA_NEEDED: REACH status] |