LT1102CH vs LT1102ACH 对比
详细并排对比 LT1102CH 出自 Analog Devices 和 LT1102ACH 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
规格对比
| 参数 | LT1102CH | LT1102ACH |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | Obsolete |
| Product Type | Instrumentation Amplifier, JFET input | Single-circuit instrumentation amplifier |
| Number of Channels | 1 | — |
| Internal Gain Options | 10 or 100 (fixed) | — |
| Gain Accuracy | 0.01% | 0.01% |
| Non-Linearity | 3 ppm | — |
| Input Offset Voltage | 180 uV | 180 µV |
| Input Bias Current | < 10 pA | <10 pA |
| Input Offset Current | < 10 pA | — |
| Supply Voltage Range (differential) | +/-9 V to +/-20 V | — |
| Typical Dual Supply Rails | +/-12 V, +/-15 V, +/-18 V | — |
| 封装 | TO-5, 8-lead hermetic metal can (CH) | TO-5 metal can, 8 pins |
| 安装类型 | Through-hole, hermetic sealed | Through-hole |
| External Gain-Setting Resistor Required | No | — |
| Input Stage Topology | FET (JFET) differential input | — |
| Common-Mode Rejection | [DATA_NEEDED: CMRR] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 30 V/µs |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | [DATA_NEEDED: gain-bandwidth product] |
| Settling Time | [DATA_NEEDED: settling time] | [DATA_NEEDED: settling time] |
| Overdrive Recovery Time | [DATA_NEEDED: overdrive recovery time] | [DATA_NEEDED: overdrive recovery time] |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Supply Current per Amplifier | [DATA_NEEDED: supply current] | — |
| 工作温度范围 | [DATA_NEEDED: operating temperature range for LT1102CH] | [DATA_NEEDED: operating temperature range] |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Input Transistor Technology | — | JFET input |
| Fixed Gain Options | — | 10 or 100 V/V |
| Nonlinearity | — | 3 ppm |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| 引脚数量 | — | 8 pins |
| External Gain-Setting Resistor | — | Not required |
| Output Offset Voltage Contribution | — | None |
| Input Bias Current Temperature Behavior | — | Does not double for each 10°C temperature increase |
| REACH Status | — | [DATA_NEEDED: REACH status] |