LT1102CH vs LT1102ACH Vergleich
Detaillierter Direktvergleich von LT1102CH von Analog Devices und LT1102ACH von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LT1102CH | LT1102ACH |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Product Type | Instrumentation Amplifier, JFET input | Single-circuit instrumentation amplifier |
| Number of Channels | 1 | — |
| Internal Gain Options | 10 or 100 (fixed) | — |
| Gain Accuracy | 0.01% | 0.01% |
| Non-Linearity | 3 ppm | — |
| Input Offset Voltage | 180 uV | 180 µV |
| Input Bias Current | < 10 pA | <10 pA |
| Input Offset Current | < 10 pA | — |
| Supply Voltage Range (differential) | +/-9 V to +/-20 V | — |
| Typical Dual Supply Rails | +/-12 V, +/-15 V, +/-18 V | — |
| Gehäuse | TO-5, 8-lead hermetic metal can (CH) | TO-5 metal can, 8 pins |
| Montageart | Through-hole, hermetic sealed | Through-hole |
| External Gain-Setting Resistor Required | No | — |
| Input Stage Topology | FET (JFET) differential input | — |
| Common-Mode Rejection | [DATA_NEEDED: CMRR] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 30 V/µs |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | [DATA_NEEDED: gain-bandwidth product] |
| Settling Time | [DATA_NEEDED: settling time] | [DATA_NEEDED: settling time] |
| Overdrive Recovery Time | [DATA_NEEDED: overdrive recovery time] | [DATA_NEEDED: overdrive recovery time] |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Supply Current per Amplifier | [DATA_NEEDED: supply current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range for LT1102CH] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Input Transistor Technology | — | JFET input |
| Fixed Gain Options | — | 10 or 100 V/V |
| Nonlinearity | — | 3 ppm |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Pin-Anzahl | — | 8 pins |
| External Gain-Setting Resistor | — | Not required |
| Output Offset Voltage Contribution | — | None |
| Input Bias Current Temperature Behavior | — | Does not double for each 10°C temperature increase |
| REACH Status | — | [DATA_NEEDED: REACH status] |