LT1102CH vs LT1102ACH 比較
詳細並排比較 LT1102CH 由 Analog Devices 與 LT1102ACH 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | LT1102CH | LT1102ACH |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | Obsolete |
| Product Type | Instrumentation Amplifier, JFET input | Single-circuit instrumentation amplifier |
| Number of Channels | 1 | — |
| Internal Gain Options | 10 or 100 (fixed) | — |
| Gain Accuracy | 0.01% | 0.01% |
| Non-Linearity | 3 ppm | — |
| Input Offset Voltage | 180 uV | 180 µV |
| Input Bias Current | < 10 pA | <10 pA |
| Input Offset Current | < 10 pA | — |
| Supply Voltage Range (differential) | +/-9 V to +/-20 V | — |
| Typical Dual Supply Rails | +/-12 V, +/-15 V, +/-18 V | — |
| 封裝 | TO-5, 8-lead hermetic metal can (CH) | TO-5 metal can, 8 pins |
| 安裝類型 | Through-hole, hermetic sealed | Through-hole |
| External Gain-Setting Resistor Required | No | — |
| Input Stage Topology | FET (JFET) differential input | — |
| Common-Mode Rejection | [DATA_NEEDED: CMRR] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 30 V/µs |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | [DATA_NEEDED: gain-bandwidth product] |
| Settling Time | [DATA_NEEDED: settling time] | [DATA_NEEDED: settling time] |
| Overdrive Recovery Time | [DATA_NEEDED: overdrive recovery time] | [DATA_NEEDED: overdrive recovery time] |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Supply Current per Amplifier | [DATA_NEEDED: supply current] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range for LT1102CH] | [DATA_NEEDED: operating temperature range] |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Input Transistor Technology | — | JFET input |
| Fixed Gain Options | — | 10 or 100 V/V |
| Nonlinearity | — | 3 ppm |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| 腳位數 | — | 8 pins |
| External Gain-Setting Resistor | — | Not required |
| Output Offset Voltage Contribution | — | None |
| Input Bias Current Temperature Behavior | — | Does not double for each 10°C temperature increase |
| REACH Status | — | [DATA_NEEDED: REACH status] |