MAX485EESA+T vs SN65HVD05D Comparison
Detailed side-by-side comparison of MAX485EESA+T by Analog Devices and SN65HVD05D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05D ✓ ActiveSpecification Comparison
| Parameter | MAX485EESA+T | SN65HVD05D |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Half-duplex RS-485/RS-422 transceiver | Half-duplex RS-422/RS-485 transceiver |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 2.5 Mbps | — |
| Driver Output Type | Slew-rate-limited differential driver | — |
| Receiver Output Type | Differential logic-level receiver | — |
| ESD Protection | ±15 kV | — |
| Communication Mode | Half-duplex | Half-duplex |
| Supported Standards | RS-485 and RS-422 | — |
| Package | 8-pin NSOIC/SOIC | 8-pin SOIC (D) |
| Mounting Type | Surface mount | Surface mount |
| Operating Temperature Range | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Driver and Receiver Count | 1 driver and 1 receiver | 1 differential driver and 1 differential receiver |
| Power Classification | Low-power transceiver | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Maximum Bus Length | [DATA_NEEDED: maximum bus length] | — |
| Minimum Differential Output Voltage | — | 2.5 V into a 54-ohm load |
| Driver Output State | — | 3-state |
| Receiver Failsafe Behavior | — | Open-circuit, short-circuit, and idle-bus failsafe |
| Unit Load Option | — | 1/8 unit load |
| Maximum Node Count | — | Up to 256 nodes on the bus |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Driver Output Slew Rate | — | Controlled |
| Standards Compatibility | — | ANSI TIA/EIA-485-A and ISO 8482E |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |