MAX485EESA+T vs SN65HVD05D موازنہ

تفصیلی ساتھ ساتھ موازنہ از MAX485EESA+T بذریعہ Analog Devices اور SN65HVD05D بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔

Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ فعال
Texas Instruments
SN65HVD05D SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D ✓ فعال

خصوصیات کا موازنہ

پیرامیٹر MAX485EESA+T SN65HVD05D
برانڈ Analog Devices Texas Instruments
زمرہ Interface ICs Interface ICs
لائف سائیکل کی حالت فعال فعال
Product Type Half-duplex RS-485/RS-422 transceiver Half-duplex RS-422/RS-485 transceiver
Supply Voltage Range 4.75 V to 5.25 V 4.5 V to 5.5 V
Nominal Supply Voltage 5 V —
Maximum Data Rate 2.5 Mbps —
Driver Output Type Slew-rate-limited differential driver —
Receiver Output Type Differential logic-level receiver —
ESD Protection ±15 kV —
Communication Mode Half-duplex Half-duplex
Supported Standards RS-485 and RS-422 —
پیکیج 8-pin NSOIC/SOIC 8-pin SOIC (D)
ماؤنٹنگ ٹائپ Surface mount Surface mount
آپریٹنگ درجہ حرارت رینج -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
Driver and Receiver Count 1 driver and 1 receiver 1 differential driver and 1 differential receiver
Power Classification Low-power transceiver —
RoHS اسٹیٹس [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
MSL [DATA_NEEDED: moisture sensitivity level] —
Maximum Bus Length [DATA_NEEDED: maximum bus length] —
Minimum Differential Output Voltage — 2.5 V into a 54-ohm load
Driver Output State — 3-state
Receiver Failsafe Behavior — Open-circuit, short-circuit, and idle-bus failsafe
Unit Load Option — 1/8 unit load
Maximum Node Count — Up to 256 nodes on the bus
Bus-Pin ESD Protection — Exceeds 16 kV HBM
Driver Output Slew Rate — Controlled
Standards Compatibility — ANSI TIA/EIA-485-A and ISO 8482E
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Datasheets اور وسائل

تمام مصنوعات براؤز کریں BOM بنائیں قیمت کی درخواست کریں