MAX485EESA+T vs SN65HVD05D तुलना

विस्तृत दोनों ओर की तुलना MAX485EESA+T द्वारा Analog Devices और SN65HVD05D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ सक्रिय
Texas Instruments
SN65HVD05D SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX485EESA+T SN65HVD05D
ब्रांड Analog Devices Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Half-duplex RS-485/RS-422 transceiver Half-duplex RS-422/RS-485 transceiver
Supply Voltage Range 4.75 V to 5.25 V 4.5 V to 5.5 V
Nominal Supply Voltage 5 V —
Maximum Data Rate 2.5 Mbps —
Driver Output Type Slew-rate-limited differential driver —
Receiver Output Type Differential logic-level receiver —
ESD Protection ±15 kV —
Communication Mode Half-duplex Half-duplex
Supported Standards RS-485 and RS-422 —
पैकेज 8-pin NSOIC/SOIC 8-pin SOIC (D)
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
Driver and Receiver Count 1 driver and 1 receiver 1 differential driver and 1 differential receiver
Power Classification Low-power transceiver —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
MSL [DATA_NEEDED: moisture sensitivity level] —
Maximum Bus Length [DATA_NEEDED: maximum bus length] —
Minimum Differential Output Voltage — 2.5 V into a 54-ohm load
Driver Output State — 3-state
Receiver Failsafe Behavior — Open-circuit, short-circuit, and idle-bus failsafe
Unit Load Option — 1/8 unit load
Maximum Node Count — Up to 256 nodes on the bus
Bus-Pin ESD Protection — Exceeds 16 kV HBM
Driver Output Slew Rate — Controlled
Standards Compatibility — ANSI TIA/EIA-485-A and ISO 8482E
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध