MMA1260KEG vs MMA1270KEG Comparison
Detailed side-by-side comparison of MMA1260KEG by NXP Semiconductors and MMA1270KEG by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MMA1270KEG - ±2.5g Z-Axis Micromachined Accelerometer | NXP | SOIC-16
MMA1270KEG ObsoleteSpecification Comparison
| Parameter | MMA1260KEG | MMA1270KEG |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Motion Sensors | Motion Sensors |
| Lifecycle Status | NRND | Obsolete |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $4.85 | $9.95 |
| Sensor Type | Accelerometer, single-axis analog | Accelerometer, single-axis (Z axis) |
| Measurement Range | ±1.5 g | ±2.5 g |
| Technology | Micromachined silicon capacitive MEMS | Capacitive MEMS, surface micromachined |
| Supply Voltage | 5.0 V (typ) | — |
| Supply Current | 5.0 mA (typ) | [DATA_NEEDED: typical supply current in mA] |
| Output Type | Analog, ratiometric | Analog voltage (ratiometric) |
| Zero-g Output Voltage | 2.5 V nominal at Vdd = 5.0 V | — |
| Sensitivity | [DATA_NEEDED: sensitivity in mV/g] | 712.5 mV/g to 787.5 mV/g |
| Filter | 2-pole low-pass, factory-set cutoff | — |
| Self-Test | Yes (logic-level activation) | — |
| Temperature Compensation | On-chip factory-calibrated | On-chip |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C |
| Package | 16-pin SOIC (SOP-16 / K suffix) | — |
| Mounting Type | Surface Mount | Surface Mount |
| Sensitivity Drift over Temperature | [DATA_NEEDED: %FS/°C] | — |
| Bandwidth | [DATA_NEEDED: Hz] | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Supply Voltage (VDD) | — | 4.75 V to 5.25 V |
| Zero-g Output Voltage (typ) | — | 2.5 V at VDD = 5 V |
| Bandwidth (Low-Pass Filter) | — | 50 Hz (two-pole) |
| Self-Test Input | — | Yes (logic-level, active high) |
| Package / Case | — | 16-pin SOIC (KEG suffix), tube |
| Axis | — | Z-axis (perpendicular to PCB) |