MMA1260KEG vs MMA1270KEG Vergleich
Detaillierter Direktvergleich von MMA1260KEG von NXP Semiconductors und MMA1270KEG von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MMA1270KEG - ±2.5g Z-Axis Micromachined Accelerometer | NXP | SOIC-16
MMA1270KEG ObsoleteSpezifikationsvergleich
| Parameter | MMA1260KEG | MMA1270KEG |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Motion Sensors | Motion Sensors |
| Lebenszyklusstatus | NRND | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,85 | $9,95 |
| Sensortyp | Accelerometer, single-axis analog | Accelerometer, single-axis (Z axis) |
| Messbereich | ±1.5 g | ±2.5 g |
| Technology | Micromachined silicon capacitive MEMS | Capacitive MEMS, surface micromachined |
| Versorgungsspannung | 5.0 V (typ) | — |
| Versorgungsstrom | 5.0 mA (typ) | [DATA_NEEDED: typical supply current in mA] |
| Ausgangstyp | Analog, ratiometric | Analog voltage (ratiometric) |
| Zero-g Output Voltage | 2.5 V nominal at Vdd = 5.0 V | — |
| Sensitivity | [DATA_NEEDED: sensitivity in mV/g] | 712.5 mV/g to 787.5 mV/g |
| Filter | 2-pole low-pass, factory-set cutoff | — |
| Self-Test | Yes (logic-level activation) | — |
| Temperature Compensation | On-chip factory-calibrated | On-chip |
| Betriebstemperaturbereich | -40 °C to +85 °C | -40 °C to +85 °C |
| Gehäuse | 16-pin SOIC (SOP-16 / K suffix) | — |
| Montageart | Surface Mount | Surface Mount |
| Sensitivity Drift over Temperature | [DATA_NEEDED: %FS/°C] | — |
| Bandwidth | [DATA_NEEDED: Hz] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Supply Voltage (VDD) | — | 4.75 V to 5.25 V |
| Zero-g Output Voltage (typ) | — | 2.5 V at VDD = 5 V |
| Bandwidth (Low-Pass Filter) | — | 50 Hz (two-pole) |
| Self-Test Input | — | Yes (logic-level, active high) |
| Gehäuse / Bauform | — | 16-pin SOIC (KEG suffix), tube |
| Axis | — | Z-axis (perpendicular to PCB) |