MMA1260KEG vs MMA1270KEG Сравнение
Подробное сравнение бок о бок MMA1260KEG от NXP Semiconductors и MMA1270KEG от NXP Semiconductors. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
NXP Semiconductors
MMA1270KEG - ±2.5g Z-Axis Micromachined Accelerometer | NXP | SOIC-16
MMA1270KEG ObsoleteСравнение характеристик
| Параметр | MMA1260KEG | MMA1270KEG |
|---|---|---|
| Бренд | NXP Semiconductors | NXP Semiconductors |
| Категория | Motion Sensors | Motion Sensors |
| Статус жизненного цикла | NRND | Obsolete |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $4,85 | $9,95 |
| Тип датчика | Accelerometer, single-axis analog | Accelerometer, single-axis (Z axis) |
| Диапазон измерений | ±1.5 g | ±2.5 g |
| Technology | Micromachined silicon capacitive MEMS | Capacitive MEMS, surface micromachined |
| Напряжение питания | 5.0 V (typ) | — |
| Ток потребления | 5.0 mA (typ) | [DATA_NEEDED: typical supply current in mA] |
| Тип выхода | Analog, ratiometric | Analog voltage (ratiometric) |
| Zero-g Output Voltage | 2.5 V nominal at Vdd = 5.0 V | — |
| Sensitivity | [DATA_NEEDED: sensitivity in mV/g] | 712.5 mV/g to 787.5 mV/g |
| Filter | 2-pole low-pass, factory-set cutoff | — |
| Self-Test | Yes (logic-level activation) | — |
| Temperature Compensation | On-chip factory-calibrated | On-chip |
| Диапазон рабочих температур | -40 °C to +85 °C | -40 °C to +85 °C |
| Корпус | 16-pin SOIC (SOP-16 / K suffix) | — |
| Тип монтажа | Surface Mount | Surface Mount |
| Sensitivity Drift over Temperature | [DATA_NEEDED: %FS/°C] | — |
| Bandwidth | [DATA_NEEDED: Hz] | — |
| Статус RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Supply Voltage (VDD) | — | 4.75 V to 5.25 V |
| Zero-g Output Voltage (typ) | — | 2.5 V at VDD = 5 V |
| Bandwidth (Low-Pass Filter) | — | 50 Hz (two-pole) |
| Self-Test Input | — | Yes (logic-level, active high) |
| Корпус / Типоразмер | — | 16-pin SOIC (KEG suffix), tube |
| Axis | — | Z-axis (perpendicular to PCB) |