MMA2201KEGR2 vs MMA2204KEGR2 Comparison
Detailed side-by-side comparison of MMA2201KEGR2 by NXP Semiconductors and MMA2204KEGR2 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MMA2201KEGR2 - ±40g X-Axis MEMS Accelerometer, 5V, SOIC-16 | NXP
MMA2201KEGR2 ⚠ Last Time BuySpecification Comparison
| Parameter | MMA2201KEGR2 | MMA2204KEGR2 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Motion Sensors | Motion Sensors |
| Lifecycle Status | Last Time Buy | NRND |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $8.95 | $8.60 |
| Sensor Type | Accelerometer, Single Axis (X) | MEMS Capacitive Accelerometer |
| Technology | MEMS, capacitive sensing | — |
| Full-Scale Range | ±40 g | ±100 g |
| Sensitivity | 50 mV/g nominal (ratiometric with VDD) | 20 mV/g (nominal) |
| Sensitivity Tolerance | 47.5 mV/g to 52.5 mV/g | ±5% (typical) |
| Supply Voltage (VDD) | 4.75 V to 5.25 V | — |
| Supply Current | [DATA_NEEDED: typical quiescent current] | [DATA_NEEDED: supply current] |
| Output Type | Analog, ratiometric | Analog, ratiometric to VDD |
| Output Voltage Range | [DATA_NEEDED: full-scale VOUT swing] | — |
| Bandwidth (-3 dB) | 400 Hz | — |
| Filter | 4-pole low-pass (on-chip) | — |
| Self-Test | Yes (logic-level pin) | — |
| Temperature Compensation | On-chip | — |
| Operating Temperature | -40 °C to +125 °C | -40 °C to +125 °C |
| Package | 16-pin SOIC (SOIC-16, surface mount) | 16-SOIC (300 mil) |
| Zero-g Offset | [DATA_NEEDED: zero-g output voltage at 25 °C] | — |
| Noise | [DATA_NEEDED: output noise density] | — |
| RoHS Status | Compliant (per Mouser listing) | [DATA_NEEDED: RoHS status] |
| Sensing Axis | — | X-Axis (single axis) |
| Bandwidth | — | 400 Hz (4-pole low-pass filter) |
| Supply Voltage | — | 4.75 V to 5.25 V |
| Zero-g Output | — | 2.5 V (nominal, ratiometric) |
| Mounting Type | — | Surface Mount |
| Self-Test Pin | — | Yes (per MMA2xxx datasheet convention) |
| MSL Level | — | [DATA_NEEDED: MSL level] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Noise Density | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FSO] |
| Cross-Axis Sensitivity | — | [DATA_NEEDED: cross-axis sensitivity] |