MMA2201KEGR2 vs MMA2204KEGR2 Comparaison
Comparaison détaillée côte à côte de MMA2201KEGR2 par NXP Semiconductors et MMA2204KEGR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MMA2201KEGR2 - ±40g X-Axis MEMS Accelerometer, 5V, SOIC-16 | NXP
MMA2201KEGR2 ⚠ Dernier achatComparaison des spécifications
| Paramètre | MMA2201KEGR2 | MMA2204KEGR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motion Sensors | Motion Sensors |
| Statut du cycle de vie | Dernier achat | NRND |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,95 | $8,60 |
| Type de capteur | Accelerometer, Single Axis (X) | MEMS Capacitive Accelerometer |
| Technology | MEMS, capacitive sensing | — |
| Full-Scale Range | ±40 g | ±100 g |
| Sensitivity | 50 mV/g nominal (ratiometric with VDD) | 20 mV/g (nominal) |
| Sensitivity Tolerance | 47.5 mV/g to 52.5 mV/g | ±5% (typical) |
| Supply Voltage (VDD) | 4.75 V to 5.25 V | — |
| Courant d'alimentation | [DATA_NEEDED: typical quiescent current] | [DATA_NEEDED: supply current] |
| Type de sortie | Analog, ratiometric | Analog, ratiometric to VDD |
| Plage de tension de sortie | [DATA_NEEDED: full-scale VOUT swing] | — |
| Bandwidth (-3 dB) | 400 Hz | — |
| Filter | 4-pole low-pass (on-chip) | — |
| Self-Test | Yes (logic-level pin) | — |
| Temperature Compensation | On-chip | — |
| Température de fonctionnement | -40 °C to +125 °C | -40 °C to +125 °C |
| Boîtier | 16-pin SOIC (SOIC-16, surface mount) | 16-SOIC (300 mil) |
| Zero-g Offset | [DATA_NEEDED: zero-g output voltage at 25 °C] | — |
| Noise | [DATA_NEEDED: output noise density] | — |
| Statut RoHS | Compliant (per Mouser listing) | [DATA_NEEDED: RoHS status] |
| Sensing Axis | — | X-Axis (single axis) |
| Bandwidth | — | 400 Hz (4-pole low-pass filter) |
| Tension d'alimentation | — | 4.75 V to 5.25 V |
| Zero-g Output | — | 2.5 V (nominal, ratiometric) |
| Type de montage | — | Surface Mount |
| Self-Test Pin | — | Yes (per MMA2xxx datasheet convention) |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Densité de bruit | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FSO] |
| Cross-Axis Sensitivity | — | [DATA_NEEDED: cross-axis sensitivity] |