MMA2201KEGR2 vs MMA2204KEGR2 Comparación
Comparación detallada lado a lado de MMA2201KEGR2 por NXP Semiconductors y MMA2204KEGR2 por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MMA2201KEGR2 - ±40g X-Axis MEMS Accelerometer, 5V, SOIC-16 | NXP
MMA2201KEGR2 ⚠ Última compraComparación de especificaciones
| Parámetro | MMA2201KEGR2 | MMA2204KEGR2 |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Motion Sensors | Motion Sensors |
| Estado del ciclo de vida | Última compra | NRND |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $8,95 | $8,60 |
| Tipo de sensor | Accelerometer, Single Axis (X) | MEMS Capacitive Accelerometer |
| Technology | MEMS, capacitive sensing | — |
| Full-Scale Range | ±40 g | ±100 g |
| Sensitivity | 50 mV/g nominal (ratiometric with VDD) | 20 mV/g (nominal) |
| Sensitivity Tolerance | 47.5 mV/g to 52.5 mV/g | ±5% (typical) |
| Supply Voltage (VDD) | 4.75 V to 5.25 V | — |
| Corriente de alimentación | [DATA_NEEDED: typical quiescent current] | [DATA_NEEDED: supply current] |
| Tipo de salida | Analog, ratiometric | Analog, ratiometric to VDD |
| Rango de tensión de salida | [DATA_NEEDED: full-scale VOUT swing] | — |
| Bandwidth (-3 dB) | 400 Hz | — |
| Filter | 4-pole low-pass (on-chip) | — |
| Self-Test | Yes (logic-level pin) | — |
| Temperature Compensation | On-chip | — |
| Temperatura de funcionamiento | -40 °C to +125 °C | -40 °C to +125 °C |
| Encapsulado | 16-pin SOIC (SOIC-16, surface mount) | 16-SOIC (300 mil) |
| Zero-g Offset | [DATA_NEEDED: zero-g output voltage at 25 °C] | — |
| Noise | [DATA_NEEDED: output noise density] | — |
| Estado RoHS | Compliant (per Mouser listing) | [DATA_NEEDED: RoHS status] |
| Sensing Axis | — | X-Axis (single axis) |
| Bandwidth | — | 400 Hz (4-pole low-pass filter) |
| Tensión de alimentación | — | 4.75 V to 5.25 V |
| Zero-g Output | — | 2.5 V (nominal, ratiometric) |
| Tipo de montaje | — | Surface Mount |
| Self-Test Pin | — | Yes (per MMA2xxx datasheet convention) |
| Nivel MSL | — | [DATA_NEEDED: MSL level] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Densidad de ruido | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FSO] |
| Cross-Axis Sensitivity | — | [DATA_NEEDED: cross-axis sensitivity] |