MMA2201KEGR2 vs MMA2204KEGR2 Vergleich
Detaillierter Direktvergleich von MMA2201KEGR2 von NXP Semiconductors und MMA2204KEGR2 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MMA2201KEGR2 - ±40g X-Axis MEMS Accelerometer, 5V, SOIC-16 | NXP
MMA2201KEGR2 ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | MMA2201KEGR2 | MMA2204KEGR2 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Motion Sensors | Motion Sensors |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,95 | $8,60 |
| Sensortyp | Accelerometer, Single Axis (X) | MEMS Capacitive Accelerometer |
| Technology | MEMS, capacitive sensing | — |
| Full-Scale Range | ±40 g | ±100 g |
| Sensitivity | 50 mV/g nominal (ratiometric with VDD) | 20 mV/g (nominal) |
| Sensitivity Tolerance | 47.5 mV/g to 52.5 mV/g | ±5% (typical) |
| Supply Voltage (VDD) | 4.75 V to 5.25 V | — |
| Versorgungsstrom | [DATA_NEEDED: typical quiescent current] | [DATA_NEEDED: supply current] |
| Ausgangstyp | Analog, ratiometric | Analog, ratiometric to VDD |
| Ausgangsspannungsbereich | [DATA_NEEDED: full-scale VOUT swing] | — |
| Bandwidth (-3 dB) | 400 Hz | — |
| Filter | 4-pole low-pass (on-chip) | — |
| Self-Test | Yes (logic-level pin) | — |
| Temperature Compensation | On-chip | — |
| Betriebstemperatur | -40 °C to +125 °C | -40 °C to +125 °C |
| Gehäuse | 16-pin SOIC (SOIC-16, surface mount) | 16-SOIC (300 mil) |
| Zero-g Offset | [DATA_NEEDED: zero-g output voltage at 25 °C] | — |
| Noise | [DATA_NEEDED: output noise density] | — |
| RoHS-Status | Compliant (per Mouser listing) | [DATA_NEEDED: RoHS status] |
| Sensing Axis | — | X-Axis (single axis) |
| Bandwidth | — | 400 Hz (4-pole low-pass filter) |
| Versorgungsspannung | — | 4.75 V to 5.25 V |
| Zero-g Output | — | 2.5 V (nominal, ratiometric) |
| Montageart | — | Surface Mount |
| Self-Test Pin | — | Yes (per MMA2xxx datasheet convention) |
| MSL-Level | — | [DATA_NEEDED: MSL level] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Rauschdichte | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FSO] |
| Cross-Axis Sensitivity | — | [DATA_NEEDED: cross-axis sensitivity] |