MPVZ5010G7U vs MPXV5010GC7U Comparison
Detailed side-by-side comparison of MPVZ5010G7U by NXP Semiconductors and MPXV5010GC7U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ Active
Specification Comparison
| Parameter | MPVZ5010G7U | MPXV5010GC7U |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $7.25 | $10.05 |
| Pressure Type | Vented Gauge | Differential / Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V (5 V typical) | — |
| Supply Current | 10 mA (maximum) | — |
| Analog Output Range | 0.2 V to 4.7 V | — |
| Accuracy | ±1.5 %FS (0 °C to 85 °C) | — |
| Output Type | Analog, ratiometric to Vcc | Analog (ratiometric to VCC) |
| Response Time | [DATA_NEEDED: response time ms] | [DATA_NEEDED: response time in ms] |
| Operating Temperature Range | 0 °C to +85 °C | 0 °C to +85 °C |
| Compensated Temperature Range | -10 °C to +60 °C | — |
| Storage Temperature Range | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] | -30 °C to +100 °C |
| Package | 8-DIP Module (Case 1368-01, through-hole) | — |
| Mounting Type | Through-Hole (DIP module with vent tube) | Surface Mount |
| Sensor Technology | Piezoresistive silicon micromachined | — |
| Signal Conditioning | On-chip, temperature compensated, calibrated | — |
| MSL Level | [DATA_NEEDED: MSL rating] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Body Height | 5.46 mm | — |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating in kPa] |
| Supply Voltage | — | 4.75 V to 5.25 V (typ. 5.0 V) |
| Full-Scale Output (typ. @10 kPa) | — | 4.5 V |
| Zero-Pressure Offset | — | 0.2 V to 0.85 V |
| Supply Current (typ.) | — | [DATA_NEEDED: supply current in mA] |
| Output Impedance | — | < 50 ohm |
| Accuracy (typ.) | — | ±5 % of V_FSS (0-85 °C) |
| Package / Case | — | SOP-8 (Case 1737), Surface Mount |
| Port Configuration | — | Dual axial horizontal ports (gauge) |
| Media Compatibility | — | Non-corrosive, non-ionic media (dry air, dry gases) |