MPVZ5010G7U vs MPXV5010GC7U Comparaison
Comparaison détaillée côte à côte de MPVZ5010G7U par NXP Semiconductors et MPXV5010GC7U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ Actif
Comparaison des spécifications
| Paramètre | MPVZ5010G7U | MPXV5010GC7U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,25 | $10,05 |
| Pressure Type | Vented Gauge | Differential / Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V (5 V typical) | — |
| Courant d'alimentation | 10 mA (maximum) | — |
| Analog Output Range | 0.2 V to 4.7 V | — |
| Accuracy | ±1.5 %FS (0 °C to 85 °C) | — |
| Type de sortie | Analog, ratiometric to Vcc | Analog (ratiometric to VCC) |
| Response Time | [DATA_NEEDED: response time ms] | [DATA_NEEDED: response time in ms] |
| Plage de température de fonctionnement | 0 °C to +85 °C | 0 °C to +85 °C |
| Compensated Temperature Range | -10 °C to +60 °C | — |
| Storage Temperature Range | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] | -30 °C to +100 °C |
| Boîtier | 8-DIP Module (Case 1368-01, through-hole) | — |
| Type de montage | Through-Hole (DIP module with vent tube) | Surface Mount |
| Sensor Technology | Piezoresistive silicon micromachined | — |
| Signal Conditioning | On-chip, temperature compensated, calibrated | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Body Height | 5.46 mm | — |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating in kPa] |
| Tension d'alimentation | — | 4.75 V to 5.25 V (typ. 5.0 V) |
| Full-Scale Output (typ. @10 kPa) | — | 4.5 V |
| Zero-Pressure Offset | — | 0.2 V to 0.85 V |
| Supply Current (typ.) | — | [DATA_NEEDED: supply current in mA] |
| Output Impedance | — | < 50 ohm |
| Accuracy (typ.) | — | ±5 % of V_FSS (0-85 °C) |
| Boîtier / Format | — | SOP-8 (Case 1737), Surface Mount |
| Port Configuration | — | Dual axial horizontal ports (gauge) |
| Media Compatibility | — | Non-corrosive, non-ionic media (dry air, dry gases) |