MPVZ5010G7U vs MPXV5010GC7U Сравнение

Подробное сравнение бок о бок MPVZ5010G7U от NXP Semiconductors и MPXV5010GC7U от NXP Semiconductors. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

NXP Semiconductors
MPVZ5010G7U MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U ✓ Активен
NXP Semiconductors
MPXV5010GC7U MPXV5010GC7U - 0-10kPa Differential Pressure Sensor | NXP

MPXV5010GC7U - 0-10kPa Differential Pressure Sensor | NXP

MPXV5010GC7U ✓ Активен

Сравнение характеристик

Параметр MPVZ5010G7U MPXV5010GC7U
Бренд NXP Semiconductors NXP Semiconductors
Категория Pressure Sensors Pressure Sensors
Статус жизненного цикла Активен Активен
Наличие In Stock In Stock
Цена за единицу (USD) $7,25 $10,05
Pressure Type Vented Gauge Differential / Gauge
Operating Pressure Range 0 kPa to 10 kPa (0 to 1.45 PSI) 0 kPa to 10 kPa
Supply Voltage (Vcc) 4.75 V to 5.25 V (5 V typical) —
Ток потребления 10 mA (maximum) —
Analog Output Range 0.2 V to 4.7 V —
Accuracy ±1.5 %FS (0 °C to 85 °C) —
Тип выхода Analog, ratiometric to Vcc Analog (ratiometric to VCC)
Response Time [DATA_NEEDED: response time ms] [DATA_NEEDED: response time in ms]
Диапазон рабочих температур 0 °C to +85 °C 0 °C to +85 °C
Compensated Temperature Range -10 °C to +60 °C —
Storage Temperature Range -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] -30 °C to +100 °C
Корпус 8-DIP Module (Case 1368-01, through-hole) —
Тип монтажа Through-Hole (DIP module with vent tube) Surface Mount
Sensor Technology Piezoresistive silicon micromachined —
Signal Conditioning On-chip, temperature compensated, calibrated —
Уровень MSL [DATA_NEEDED: MSL rating] —
Статус RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance]
Body Height 5.46 mm —
Maximum Overpressure — [DATA_NEEDED: maximum overpressure rating in kPa]
Напряжение питания — 4.75 V to 5.25 V (typ. 5.0 V)
Full-Scale Output (typ. @10 kPa) — 4.5 V
Zero-Pressure Offset — 0.2 V to 0.85 V
Supply Current (typ.) — [DATA_NEEDED: supply current in mA]
Output Impedance — < 50 ohm
Accuracy (typ.) — ±5 % of V_FSS (0-85 °C)
Корпус / Типоразмер — SOP-8 (Case 1737), Surface Mount
Port Configuration — Dual axial horizontal ports (gauge)
Media Compatibility — Non-corrosive, non-ionic media (dry air, dry gases)

Даташиты & ресурсы

Все товары Создать BOM Запросить цену