MPVZ5010G7U vs MPXV5010GC7U 비교
다음의 상세 나란히 비교: MPVZ5010G7U 제조: NXP Semiconductors 및 MPXV5010GC7U 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MPVZ5010G7U | MPXV5010GC7U |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $7.25 | $10.05 |
| Pressure Type | Vented Gauge | Differential / Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V (5 V typical) | — |
| 공급 전류 | 10 mA (maximum) | — |
| Analog Output Range | 0.2 V to 4.7 V | — |
| Accuracy | ±1.5 %FS (0 °C to 85 °C) | — |
| 출력 유형 | Analog, ratiometric to Vcc | Analog (ratiometric to VCC) |
| Response Time | [DATA_NEEDED: response time ms] | [DATA_NEEDED: response time in ms] |
| 동작 온도 범위 | 0 °C to +85 °C | 0 °C to +85 °C |
| Compensated Temperature Range | -10 °C to +60 °C | — |
| Storage Temperature Range | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] | -30 °C to +100 °C |
| 패키지 | 8-DIP Module (Case 1368-01, through-hole) | — |
| 실장 유형 | Through-Hole (DIP module with vent tube) | Surface Mount |
| Sensor Technology | Piezoresistive silicon micromachined | — |
| Signal Conditioning | On-chip, temperature compensated, calibrated | — |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Body Height | 5.46 mm | — |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating in kPa] |
| 공급 전압 | — | 4.75 V to 5.25 V (typ. 5.0 V) |
| Full-Scale Output (typ. @10 kPa) | — | 4.5 V |
| Zero-Pressure Offset | — | 0.2 V to 0.85 V |
| Supply Current (typ.) | — | [DATA_NEEDED: supply current in mA] |
| Output Impedance | — | < 50 ohm |
| Accuracy (typ.) | — | ±5 % of V_FSS (0-85 °C) |
| 패키지 / 케이스 | — | SOP-8 (Case 1737), Surface Mount |
| Port Configuration | — | Dual axial horizontal ports (gauge) |
| Media Compatibility | — | Non-corrosive, non-ionic media (dry air, dry gases) |