MPX2010DP vs MPXV2010DP Comparison
Detailed side-by-side comparison of MPX2010DP by NXP Semiconductors and MPXV2010DP by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics
MPXV2010DP ✓ ActiveSpecification Comparison
| Parameter | MPX2010DP | MPXV2010DP |
|---|---|---|
| Brand | NXP Semiconductors | STMicroelectronics |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $8.50 | $6.05 |
| Sensor Type | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | — |
| Output Type | Analog voltage, Wheatstone bridge (mV level) | Analog, Ratiometric |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| Supply Voltage | 10 V DC typical (max 16 V) | 10 V nominal |
| Linearity | ±0.05% (typ) | — |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | On-Chip, 0 C to 85 C |
| Operating Temperature | -40 °C to +125 °C | 0 C to 85 C |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| RoHS Status | Compliant | Compliant |
| Product Type | — | Pressure Sensor (Piezoresistive, Differential) |
| Operating Pressure Range | — | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Pressure Type | — | Differential |
| Output Voltage Range | — | 0 mV to 25 mV |
| Port Style | — | Dual Ports, Same Side (3.3 mm Tube Male) |
| Package | — | 8-BSOP (0.475", 12.06 mm Width), Surface Mount |
| Calibration | — | On-Chip, Laser-Trimmed |
| Output Impedance | — | [DATA_NEEDED: typical output impedance per side, ohms] |
| Hysteresis & Linearity | — | [DATA_NEEDED: %FSS linearity and %FSS hysteresis] |
| Response Time / Bandwidth | — | [DATA_NEEDED: response time or bandwidth] |
| Mounting Type | — | Surface Mount |
| MSL Level | — | [DATA_NEEDED: moisture sensitivity level] |