MPX2010DP vs MPXV2010DP So sánh

So sánh chi tiết song song của MPX2010DP bằng NXP Semiconductors và MPXV2010DP bằng STMicroelectronics. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ Hoạt động
STMicroelectronics
MPXV2010DP MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics

MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics

MPXV2010DP ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MPX2010DP MPXV2010DP
Thương hiệu NXP Semiconductors STMicroelectronics
Danh mục Pressure Sensors Pressure Sensors
Trạng thái vòng đời Hoạt động Hoạt động
Kiểu cảm biến Differential Pressure Sensor —
Pressure Range 0 to 10 kPa (0 to 1.45 PSI) —
Technology Piezoresistive (silicon strain gauge bridge) —
Kiểu đầu ra Analog voltage, Wheatstone bridge (mV level) Analog, Ratiometric
Typical Full-Scale Span 25 mV at 10 V excitation —
Zero Pressure Offset 0 mV nominally (±1.0 mV max) —
Điện áp cung cấp 10 V DC typical (max 16 V) 10 V nominal
Linearity ±0.05% (typ) —
Temperature Compensation 0 °C to +85 °C (on-chip) On-Chip, 0 C to 85 C
Nhiệt độ hoạt động -40 °C to +125 °C 0 C to 85 C
Response Time 1.0 ms (typical) —
Maximum Overpressure 75 kPa —
Burst Pressure 200 kPa —
Port Configuration Dual ports (differential), 0.19 inch / 4.93 mm tubes —
Package / Mounting 4-SIP Module (through-hole with axial tubes) —
Media Compatibility Dry air or non-corrosive gas —
Trạng thái RoHS Compliant Compliant
Product Type — Pressure Sensor (Piezoresistive, Differential)
Operating Pressure Range — 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Pressure Type — Differential
Khoảng điện áp đầu ra — 0 mV to 25 mV
Port Style — Dual Ports, Same Side (3.3 mm Tube Male)
Hộp — 8-BSOP (0.475", 12.06 mm Width), Surface Mount
Calibration — On-Chip, Laser-Trimmed
Output Impedance — [DATA_NEEDED: typical output impedance per side, ohms]
Hysteresis & Linearity — [DATA_NEEDED: %FSS linearity and %FSS hysteresis]
Response Time / Bandwidth — [DATA_NEEDED: response time or bandwidth]
Kiểu lắp đặt — Surface Mount
Cấp MSL — [DATA_NEEDED: moisture sensitivity level]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá