MPX2010DP vs MPXV2010DP Comparaison
Comparaison détaillée côte à côte de MPX2010DP par NXP Semiconductors et MPXV2010DP par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics
MPXV2010DP ✓ ActifComparaison des spécifications
| Paramètre | MPX2010DP | MPXV2010DP |
|---|---|---|
| Marque | NXP Semiconductors | STMicroelectronics |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,50 | $6,05 |
| Type de capteur | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | — |
| Type de sortie | Analog voltage, Wheatstone bridge (mV level) | Analog, Ratiometric |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| Tension d'alimentation | 10 V DC typical (max 16 V) | 10 V nominal |
| Linearity | ±0.05% (typ) | — |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | On-Chip, 0 C to 85 C |
| Température de fonctionnement | -40 °C to +125 °C | 0 C to 85 C |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| Statut RoHS | Compliant | Compliant |
| Product Type | — | Pressure Sensor (Piezoresistive, Differential) |
| Operating Pressure Range | — | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Pressure Type | — | Differential |
| Plage de tension de sortie | — | 0 mV to 25 mV |
| Port Style | — | Dual Ports, Same Side (3.3 mm Tube Male) |
| Boîtier | — | 8-BSOP (0.475", 12.06 mm Width), Surface Mount |
| Calibration | — | On-Chip, Laser-Trimmed |
| Output Impedance | — | [DATA_NEEDED: typical output impedance per side, ohms] |
| Hysteresis & Linearity | — | [DATA_NEEDED: %FSS linearity and %FSS hysteresis] |
| Response Time / Bandwidth | — | [DATA_NEEDED: response time or bandwidth] |
| Type de montage | — | Surface Mount |
| Niveau MSL | — | [DATA_NEEDED: moisture sensitivity level] |