MPX2010DP vs MPXV2010DP Vergleich
Detaillierter Direktvergleich von MPX2010DP von NXP Semiconductors und MPXV2010DP von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics
MPXV2010DP ✓ AktivSpezifikationsvergleich
| Parameter | MPX2010DP | MPXV2010DP |
|---|---|---|
| Marke | NXP Semiconductors | STMicroelectronics |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,50 | $6,05 |
| Sensortyp | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | — |
| Ausgangstyp | Analog voltage, Wheatstone bridge (mV level) | Analog, Ratiometric |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| Versorgungsspannung | 10 V DC typical (max 16 V) | 10 V nominal |
| Linearity | ±0.05% (typ) | — |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | On-Chip, 0 C to 85 C |
| Betriebstemperatur | -40 °C to +125 °C | 0 C to 85 C |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| RoHS-Status | Compliant | Compliant |
| Product Type | — | Pressure Sensor (Piezoresistive, Differential) |
| Operating Pressure Range | — | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Pressure Type | — | Differential |
| Ausgangsspannungsbereich | — | 0 mV to 25 mV |
| Port Style | — | Dual Ports, Same Side (3.3 mm Tube Male) |
| Gehäuse | — | 8-BSOP (0.475", 12.06 mm Width), Surface Mount |
| Calibration | — | On-Chip, Laser-Trimmed |
| Output Impedance | — | [DATA_NEEDED: typical output impedance per side, ohms] |
| Hysteresis & Linearity | — | [DATA_NEEDED: %FSS linearity and %FSS hysteresis] |
| Response Time / Bandwidth | — | [DATA_NEEDED: response time or bandwidth] |
| Montageart | — | Surface Mount |
| MSL-Level | — | [DATA_NEEDED: moisture sensitivity level] |