MSP430F148IPM vs MSP430F156IPM Comparison

Detailed side-by-side comparison of MSP430F148IPM by Texas Instruments and MSP430F156IPM by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
MSP430F148IPM MSP430F148IPM - 8MHz 16-bit MCU, 48KB Flash, 12-bit ADC

MSP430F148IPM - 8MHz 16-bit MCU, 48KB Flash, 12-bit ADC

MSP430F148IPM ✓ Active
Texas Instruments
MSP430F156IPM MSP430F156IPM - 8MHz 16-Bit Mixed-Signal MCU | TI

MSP430F156IPM - 8MHz 16-Bit Mixed-Signal MCU | TI

MSP430F156IPM ✓ Active

Specification Comparison

Parameter MSP430F148IPM MSP430F156IPM
Brand Texas Instruments Texas Instruments
Category Microcontrollers Microcontrollers
Lifecycle Status Active Active
CPU Architecture 16-bit MSP430 RISC 16-bit RISC
Maximum Clock Frequency 8 MHz —
Flash Memory 48 KB 24 KB (24K x 8 plus 256 B)
SRAM 2 KB 1 KB
ADC Resolution 12 bit 12 bit
Comparator Integrated Integrated
Serial Interfaces SPI and UART I2C, SPI, and UART
USART Count 2 —
Supply Voltage Range 2.5 V to 3.3 V 1.8 V to 3.6 V
Operating Temperature Range -40°C to 85°C —
Package 64-pin LQFP (PM), 10 x 10 mm 64-LQFP, 10 x 10 mm
Mounting Type Surface Mount Surface mount
Programmable GPIO [DATA_NEEDED: programmable GPIO count] —
ADC Input Channels [DATA_NEEDED: ADC input channel count] —
Timer Count [DATA_NEEDED: timer count] —
Active Mode Current [DATA_NEEDED: active mode current at specified frequency and voltage] —
Standby Mode Current [DATA_NEEDED: standby mode current] —
RAM Retention Current [DATA_NEEDED: RAM retention current] —
RoHS Status [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Product Type — 16-bit mixed-signal microcontroller
Maximum Clock Speed — 8 MHz
Instruction Cycle Time — 125 ns
DAC Configuration — Dual 12-bit DAC
DMA Controller — 3-channel internal DMA
I2C Maximum Data Rate — 400 kbps
Active Current — 330 µA at 1 MHz and 2.2 V
Standby Current — 1.1 µA
Off Current with RAM Retention — 0.2 µA
Wake-Up Time from Standby — Less than 6 µs
Power-Saving Modes — 5
I/O Port Count — 22
Operating Temperature Grade — Industrial
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Datasheets & Resources

Browse All Products Create BOM Request Quote