MSP430F148IPM vs MSP430F156IPM Karşılaştırma

Ayrıntılı yan yana karşılaştırma MSP430F148IPM tarafından Texas Instruments ve MSP430F156IPM tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
MSP430F148IPM MSP430F148IPM - 8MHz 16-bit MCU, 48KB Flash, 12-bit ADC

MSP430F148IPM - 8MHz 16-bit MCU, 48KB Flash, 12-bit ADC

MSP430F148IPM ✓ Aktif
Texas Instruments
MSP430F156IPM MSP430F156IPM - 8MHz 16-Bit Mixed-Signal MCU | TI

MSP430F156IPM - 8MHz 16-Bit Mixed-Signal MCU | TI

MSP430F156IPM ✓ Aktif

Özellik Karşılaştırması

Parametre MSP430F148IPM MSP430F156IPM
Marka Texas Instruments Texas Instruments
Kategori Microcontrollers Microcontrollers
Yaşam Döngüsü Durumu Aktif Aktif
CPU Architecture 16-bit MSP430 RISC 16-bit RISC
Azami Saat Hızı 8 MHz —
Flash Memory 48 KB 24 KB (24K x 8 plus 256 B)
SRAM 2 KB 1 KB
ADC Resolution 12 bit 12 bit
Comparator Integrated Integrated
Serial Interfaces SPI and UART I2C, SPI, and UART
USART Count 2 —
Supply Voltage Range 2.5 V to 3.3 V 1.8 V to 3.6 V
İşletim Sıcaklığı Aralığı -40°C to 85°C —
Paket 64-pin LQFP (PM), 10 x 10 mm 64-LQFP, 10 x 10 mm
Montaj Türü Surface Mount Surface mount
Programmable GPIO [DATA_NEEDED: programmable GPIO count] —
ADC Input Channels [DATA_NEEDED: ADC input channel count] —
Timer Count [DATA_NEEDED: timer count] —
Active Mode Current [DATA_NEEDED: active mode current at specified frequency and voltage] —
Standby Mode Current [DATA_NEEDED: standby mode current] —
RAM Retention Current [DATA_NEEDED: RAM retention current] —
RoHS Durumu [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Product Type — 16-bit mixed-signal microcontroller
Maximum Clock Speed — 8 MHz
Instruction Cycle Time — 125 ns
DAC Configuration — Dual 12-bit DAC
DMA Controller — 3-channel internal DMA
I2C Maximum Data Rate — 400 kbps
Active Current — 330 µA at 1 MHz and 2.2 V
Standby Current — 1.1 µA
Off Current with RAM Retention — 0.2 µA
Wake-Up Time from Standby — Less than 6 µs
Power-Saving Modes — 5
I/O Port Count — 22
Operating Temperature Grade — Industrial
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin