MSP430F148IPM vs MSP430F156IPM तुलना

विस्तृत दोनों ओर की तुलना MSP430F148IPM द्वारा Texas Instruments और MSP430F156IPM द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
MSP430F148IPM MSP430F148IPM - 8MHz 16-bit MCU, 48KB Flash, 12-bit ADC

MSP430F148IPM - 8MHz 16-bit MCU, 48KB Flash, 12-bit ADC

MSP430F148IPM ✓ सक्रिय
Texas Instruments
MSP430F156IPM MSP430F156IPM - 8MHz 16-Bit Mixed-Signal MCU | TI

MSP430F156IPM - 8MHz 16-Bit Mixed-Signal MCU | TI

MSP430F156IPM ✓ सक्रिय

विशेषता तुलना

पैरामीटर MSP430F148IPM MSP430F156IPM
ब्रांड Texas Instruments Texas Instruments
श्रेणी Microcontrollers Microcontrollers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
CPU Architecture 16-bit MSP430 RISC 16-bit RISC
अधिकतम क्लॉक फ़्रीक्वेंसी 8 MHz —
Flash Memory 48 KB 24 KB (24K x 8 plus 256 B)
SRAM 2 KB 1 KB
ADC Resolution 12 bit 12 bit
Comparator Integrated Integrated
Serial Interfaces SPI and UART I2C, SPI, and UART
USART Count 2 —
Supply Voltage Range 2.5 V to 3.3 V 1.8 V to 3.6 V
ऑपरेटिंग तापमान रेंज -40°C to 85°C —
पैकेज 64-pin LQFP (PM), 10 x 10 mm 64-LQFP, 10 x 10 mm
माउंटिंग प्रकार Surface Mount Surface mount
Programmable GPIO [DATA_NEEDED: programmable GPIO count] —
ADC Input Channels [DATA_NEEDED: ADC input channel count] —
Timer Count [DATA_NEEDED: timer count] —
Active Mode Current [DATA_NEEDED: active mode current at specified frequency and voltage] —
Standby Mode Current [DATA_NEEDED: standby mode current] —
RAM Retention Current [DATA_NEEDED: RAM retention current] —
RoHS स्थिति [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Product Type — 16-bit mixed-signal microcontroller
Maximum Clock Speed — 8 MHz
Instruction Cycle Time — 125 ns
DAC Configuration — Dual 12-bit DAC
DMA Controller — 3-channel internal DMA
I2C Maximum Data Rate — 400 kbps
Active Current — 330 µA at 1 MHz and 2.2 V
Standby Current — 1.1 µA
Off Current with RAM Retention — 0.2 µA
Wake-Up Time from Standby — Less than 6 µs
Power-Saving Modes — 5
I/O Port Count — 22
Operating Temperature Grade — Industrial
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध