MSP430F148IPM vs MSP430F156IPM So sánh

So sánh chi tiết song song của MSP430F148IPM bằng Texas Instruments và MSP430F156IPM bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
MSP430F148IPM MSP430F148IPM - 8MHz 16-bit MCU, 48KB Flash, 12-bit ADC

MSP430F148IPM - 8MHz 16-bit MCU, 48KB Flash, 12-bit ADC

MSP430F148IPM ✓ Hoạt động
Texas Instruments
MSP430F156IPM MSP430F156IPM - 8MHz 16-Bit Mixed-Signal MCU | TI

MSP430F156IPM - 8MHz 16-Bit Mixed-Signal MCU | TI

MSP430F156IPM ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MSP430F148IPM MSP430F156IPM
Thương hiệu Texas Instruments Texas Instruments
Danh mục Microcontrollers Microcontrollers
Trạng thái vòng đời Hoạt động Hoạt động
CPU Architecture 16-bit MSP430 RISC 16-bit RISC
Tần số xung maksimum 8 MHz —
Flash Memory 48 KB 24 KB (24K x 8 plus 256 B)
SRAM 2 KB 1 KB
ADC Resolution 12 bit 12 bit
Comparator Integrated Integrated
Serial Interfaces SPI and UART I2C, SPI, and UART
USART Count 2 —
Supply Voltage Range 2.5 V to 3.3 V 1.8 V to 3.6 V
Khoảng nhiệt độ hoạt động -40°C to 85°C —
Hộp 64-pin LQFP (PM), 10 x 10 mm 64-LQFP, 10 x 10 mm
Kiểu lắp đặt Surface Mount Surface mount
Programmable GPIO [DATA_NEEDED: programmable GPIO count] —
ADC Input Channels [DATA_NEEDED: ADC input channel count] —
Timer Count [DATA_NEEDED: timer count] —
Active Mode Current [DATA_NEEDED: active mode current at specified frequency and voltage] —
Standby Mode Current [DATA_NEEDED: standby mode current] —
RAM Retention Current [DATA_NEEDED: RAM retention current] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Product Type — 16-bit mixed-signal microcontroller
Maximum Clock Speed — 8 MHz
Instruction Cycle Time — 125 ns
DAC Configuration — Dual 12-bit DAC
DMA Controller — 3-channel internal DMA
I2C Maximum Data Rate — 400 kbps
Active Current — 330 µA at 1 MHz and 2.2 V
Standby Current — 1.1 µA
Off Current with RAM Retention — 0.2 µA
Wake-Up Time from Standby — Less than 6 µs
Power-Saving Modes — 5
I/O Port Count — 22
Operating Temperature Grade — Industrial
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá