NE5532APSR vs TL072CP Comparison
Detailed side-by-side comparison of NE5532APSR by Texas Instruments and TL072CP by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActiveSpecification Comparison
| Parameter | NE5532APSR | TL072CP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Number of Amplifiers | 2 circuits | — |
| Supply Voltage Range | ±5 V to ±15 V | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Slew Rate | 9 V/µs typical | 13 V/µs (typical) |
| Input Bias Current | 1 µA typical | 30 pA (typical) |
| High DC Voltage Gain | 100 V/mV typical | — |
| Operating Temperature Range | 0°C to 70°C | 0°C to +70°C (C grade) |
| Package Type | 8-pin SOIC | — |
| Number of Pins | 8 pins | — |
| Compensation | Internally compensated for unity-gain operation | — |
| Output Short-Circuit Protection | Included | Yes |
| Input Protection Diodes | Included | — |
| Output Drive Capability | High | — |
| Maximum-Output-Swing Bandwidth | High | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Amplifier Type | — | JFET-Input Operational Amplifier |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Offset Voltage | — | 3 mV (typical, C grade) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| Package / Case | — | 8-PDIP (Plastic DIP, through-hole) |
| Mounting Type | — | Through Hole |
| Pin Count | — | 8 |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |