NE5532APSR vs TL072CP Vergleich
Detaillierter Direktvergleich von NE5532APSR von Texas Instruments und TL072CP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ AktivSpezifikationsvergleich
| Parameter | NE5532APSR | TL072CP |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Amplifiers | 2 circuits | — |
| Supply Voltage Range | ±5 V to ±15 V | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Slew Rate | 9 V/µs typical | 13 V/µs (typical) |
| Input Bias Current | 1 µA typical | 30 pA (typical) |
| High DC Voltage Gain | 100 V/mV typical | — |
| Betriebstemperaturbereich | 0°C to 70°C | 0°C to +70°C (C grade) |
| Package Type | 8-pin SOIC | — |
| Anzahl der Pins | 8 pins | — |
| Compensation | Internally compensated for unity-gain operation | — |
| Output Short-Circuit Protection | Included | Yes |
| Input Protection Diodes | Included | — |
| Output Drive Capability | High | — |
| Maximum-Output-Swing Bandwidth | High | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Amplifier Type | — | JFET-Input Operational Amplifier |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Offset Voltage | — | 3 mV (typical, C grade) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| Gehäuse / Bauform | — | 8-PDIP (Plastic DIP, through-hole) |
| Montageart | — | Through Hole |
| Pin-Anzahl | — | 8 |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |