NE5532APSR vs TL072CP Comparaison
Comparaison détaillée côte à côte de NE5532APSR par Texas Instruments et TL072CP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActifComparaison des spécifications
| Paramètre | NE5532APSR | TL072CP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Amplifiers | 2 circuits | — |
| Supply Voltage Range | ±5 V to ±15 V | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Slew Rate | 9 V/µs typical | 13 V/µs (typical) |
| Input Bias Current | 1 µA typical | 30 pA (typical) |
| High DC Voltage Gain | 100 V/mV typical | — |
| Plage de température de fonctionnement | 0°C to 70°C | 0°C to +70°C (C grade) |
| Package Type | 8-pin SOIC | — |
| Nombre de broches | 8 pins | — |
| Compensation | Internally compensated for unity-gain operation | — |
| Output Short-Circuit Protection | Included | Yes |
| Input Protection Diodes | Included | — |
| Output Drive Capability | High | — |
| Maximum-Output-Swing Bandwidth | High | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Amplifier Type | — | JFET-Input Operational Amplifier |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Offset Voltage | — | 3 mV (typical, C grade) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| Boîtier / Format | — | 8-PDIP (Plastic DIP, through-hole) |
| Type de montage | — | Through Hole |
| Nombre de broches | — | 8 |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |