NE5534IP vs OPA828 Comparison
Detailed side-by-side comparison of NE5534IP by Texas Instruments and OPA828 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | NE5534IP | OPA828 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Single low-noise operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typ | — |
| Maximum Supply Voltage | 30 V | — |
| Equivalent Input Noise Voltage Density | 3.5 nV/√Hz | — |
| DC Voltage Gain | 100 dB typ | — |
| Common-Mode Rejection Ratio | 100 dB typ | — |
| Slew Rate | 13 V/µs typ | 150 V/us |
| Peak-to-Peak Output Voltage Swing | 32 V typ with VCC = ±18 V | — |
| Input Offset Current | 500 nA | — |
| Maximum Input Offset Voltage | 5000 µV | — |
| Operating Temperature Range | 0°C to 70°C | — |
| Package | 8-pin PDIP | SOIC-8 (D) / HVSSOP-8 (DGN) |
| Mounting Type | Through-hole | Surface Mount |
| RoHS Status | Compliant | Compliant |
| Input Offset Voltage | [DATA_NEEDED: typical and maximum input offset voltage] | 50 uV |
| Input Bias Current | [DATA_NEEDED: typical and maximum input bias current] | 1 pA (typical) |
| Supply Current | [DATA_NEEDED: typical and maximum supply current] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing by supply condition] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Amplifier Type | — | JFET-Input Operational Amplifier (RRO) |
| Channels | — | 1 |
| Gain Bandwidth Product | — | 45 MHz |
| Supply Voltage Range | — | +/-4 V to 36 V (8 V to 36 V single supply) |
| Input Voltage Noise Density | — | 4 nV/Hz at 1 kHz |
| Input Voltage Noise (0.1 Hz to 10 Hz) | — | 60 nVRMS |
| Input Offset Drift | — | 0.45 uV/C |
| Output Type | — | Rail-to-Rail Output (RRO) |
| Input Type | — | MUX-friendly JFET inputs |
| Operating Temperature | — | -40C to +125C |
| Quiescent Current | — | [DATA_NEEDED: quiescent current per amplifier] |
| Successor To | — | OPA627 / OPA827 |