NE5534IP vs OPA828 Comparación
Comparación detallada lado a lado de NE5534IP por Texas Instruments y OPA828 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | NE5534IP | OPA828 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Single low-noise operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typ | — |
| Maximum Supply Voltage | 30 V | — |
| Equivalent Input Noise Voltage Density | 3.5 nV/√Hz | — |
| DC Voltage Gain | 100 dB typ | — |
| Common-Mode Rejection Ratio | 100 dB typ | — |
| Slew Rate | 13 V/µs typ | 150 V/us |
| Peak-to-Peak Output Voltage Swing | 32 V typ with VCC = ±18 V | — |
| Input Offset Current | 500 nA | — |
| Maximum Input Offset Voltage | 5000 µV | — |
| Rango de temperatura de funcionamiento | 0°C to 70°C | — |
| Encapsulado | 8-pin PDIP | SOIC-8 (D) / HVSSOP-8 (DGN) |
| Tipo de montaje | Through-hole | Surface Mount |
| Estado RoHS | Compliant | Compliant |
| Input Offset Voltage | [DATA_NEEDED: typical and maximum input offset voltage] | 50 uV |
| Input Bias Current | [DATA_NEEDED: typical and maximum input bias current] | 1 pA (typical) |
| Corriente de alimentación | [DATA_NEEDED: typical and maximum supply current] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing by supply condition] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Amplifier Type | — | JFET-Input Operational Amplifier (RRO) |
| Canales | — | 1 |
| Gain Bandwidth Product | — | 45 MHz |
| Supply Voltage Range | — | +/-4 V to 36 V (8 V to 36 V single supply) |
| Input Voltage Noise Density | — | 4 nV/Hz at 1 kHz |
| Input Voltage Noise (0.1 Hz to 10 Hz) | — | 60 nVRMS |
| Input Offset Drift | — | 0.45 uV/C |
| Tipo de salida | — | Rail-to-Rail Output (RRO) |
| Input Type | — | MUX-friendly JFET inputs |
| Temperatura de funcionamiento | — | -40C to +125C |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current per amplifier] |
| Successor To | — | OPA627 / OPA827 |