NE5534IP vs OPA828 Comparaison
Comparaison détaillée côte à côte de NE5534IP par Texas Instruments et OPA828 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | NE5534IP | OPA828 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Single low-noise operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typ | — |
| Maximum Supply Voltage | 30 V | — |
| Equivalent Input Noise Voltage Density | 3.5 nV/√Hz | — |
| DC Voltage Gain | 100 dB typ | — |
| Common-Mode Rejection Ratio | 100 dB typ | — |
| Slew Rate | 13 V/µs typ | 150 V/us |
| Peak-to-Peak Output Voltage Swing | 32 V typ with VCC = ±18 V | — |
| Input Offset Current | 500 nA | — |
| Maximum Input Offset Voltage | 5000 µV | — |
| Plage de température de fonctionnement | 0°C to 70°C | — |
| Boîtier | 8-pin PDIP | SOIC-8 (D) / HVSSOP-8 (DGN) |
| Type de montage | Through-hole | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Input Offset Voltage | [DATA_NEEDED: typical and maximum input offset voltage] | 50 uV |
| Input Bias Current | [DATA_NEEDED: typical and maximum input bias current] | 1 pA (typical) |
| Courant d'alimentation | [DATA_NEEDED: typical and maximum supply current] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing by supply condition] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Amplifier Type | — | JFET-Input Operational Amplifier (RRO) |
| Canaux | — | 1 |
| Gain Bandwidth Product | — | 45 MHz |
| Supply Voltage Range | — | +/-4 V to 36 V (8 V to 36 V single supply) |
| Input Voltage Noise Density | — | 4 nV/Hz at 1 kHz |
| Input Voltage Noise (0.1 Hz to 10 Hz) | — | 60 nVRMS |
| Input Offset Drift | — | 0.45 uV/C |
| Type de sortie | — | Rail-to-Rail Output (RRO) |
| Input Type | — | MUX-friendly JFET inputs |
| Température de fonctionnement | — | -40C to +125C |
| Courant de repos | — | [DATA_NEEDED: quiescent current per amplifier] |
| Successor To | — | OPA627 / OPA827 |