OPA642P vs OPA642PB Comparison
Detailed side-by-side comparison of OPA642P by Texas Instruments and OPA642PB by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | OPA642P | OPA642PB |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Wideband, low-distortion, low-gain operational amplifier | Wideband, low-distortion, low-gain operational amplifier |
| Amplifier Topology | Single voltage-feedback amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 400 MHz | — |
| Supply Voltage | ±5.5 V | — |
| Open-Loop Gain | 95 dB | — |
| Common-Mode Rejection Ratio | 90 dB | — |
| Input Noise Density | 2.7 nV/√Hz | — |
| Low-Distortion Frequency | 5 MHz | — |
| Settling Performance | 12-bit settling to 0.01% | — |
| Maximum Output Current | ±60 mA | — |
| Package | 8-pin PDIP | 8-pin PDIP, 0.300 inch (7.62 mm) pitch |
| Pin Count | 8 pins | — |
| Mounting Type | Through-hole | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Amplifier Architecture | — | Single voltage-feedback operational amplifier |
| Supply Voltage Range | — | ±4.5 V to ±5.5 V |
| Single Supply Equivalent Range | — | 9 V to 11 V |
| Stated Gain Figure | — | 90 dB |
| Operating Current | — | 25 uA |
| Quiescent Current | — | 70 uA |
| Number of Pins | — | 8 pins |
| Terminal Type | — | Through-hole |
| Package Shape | — | Rectangular |
| Temperature Grade | — | Industrial |
| Output Current | — | [DATA_NEEDED: output current] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Noise Voltage Density | — | [DATA_NEEDED: input noise voltage density] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |