OPA642P vs OPA642PB Comparaison

Comparaison détaillée côte à côte de OPA642P par Texas Instruments et OPA642PB par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
OPA642P OPA642P - 400MHz Wideband Op Amp | Texas Instruments

OPA642P - 400MHz Wideband Op Amp | Texas Instruments

OPA642P ✓ Actif

Comparaison des spécifications

Paramètre OPA642P OPA642PB
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Product Type Wideband, low-distortion, low-gain operational amplifier Wideband, low-distortion, low-gain operational amplifier
Amplifier Topology Single voltage-feedback amplifier —
Number of Circuits 1 circuit 1 circuit
Gain-Bandwidth Product 400 MHz —
Tension d'alimentation ±5.5 V —
Open-Loop Gain 95 dB —
Common-Mode Rejection Ratio 90 dB —
Input Noise Density 2.7 nV/√Hz —
Low-Distortion Frequency 5 MHz —
Settling Performance 12-bit settling to 0.01% —
Courant de sortie maximal ±60 mA —
Boîtier 8-pin PDIP 8-pin PDIP, 0.300 inch (7.62 mm) pitch
Nombre de broches 8 pins —
Type de montage Through-hole —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Slew Rate [DATA_NEEDED: slew rate] [DATA_NEEDED: slew rate]
Amplifier Architecture — Single voltage-feedback operational amplifier
Supply Voltage Range — ±4.5 V to ±5.5 V
Single Supply Equivalent Range — 9 V to 11 V
Stated Gain Figure — 90 dB
Operating Current — 25 uA
Courant de repos — 70 uA
Nombre de broches — 8 pins
Terminal Type — Through-hole
Package Shape — Rectangular
Temperature Grade — Industrial
Output Current — [DATA_NEEDED: output current]
Gain Bandwidth Product — [DATA_NEEDED: gain bandwidth product]
Input Offset Voltage — [DATA_NEEDED: input offset voltage]
Input Bias Current — [DATA_NEEDED: input bias current]
Input Common-Mode Range — [DATA_NEEDED: input common-mode voltage range]
Output Voltage Swing — [DATA_NEEDED: output voltage swing]
Noise Voltage Density — [DATA_NEEDED: input noise voltage density]
Total Harmonic Distortion — [DATA_NEEDED: total harmonic distortion]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis