OPA642P vs OPA642PB 비교
다음의 상세 나란히 비교: OPA642P 제조: Texas Instruments 및 OPA642PB 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | OPA642P | OPA642PB |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Wideband, low-distortion, low-gain operational amplifier | Wideband, low-distortion, low-gain operational amplifier |
| Amplifier Topology | Single voltage-feedback amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 400 MHz | — |
| 공급 전압 | ±5.5 V | — |
| Open-Loop Gain | 95 dB | — |
| Common-Mode Rejection Ratio | 90 dB | — |
| Input Noise Density | 2.7 nV/√Hz | — |
| Low-Distortion Frequency | 5 MHz | — |
| Settling Performance | 12-bit settling to 0.01% | — |
| 최대 출력 전류 | ±60 mA | — |
| 패키지 | 8-pin PDIP | 8-pin PDIP, 0.300 inch (7.62 mm) pitch |
| 핀 수 | 8 pins | — |
| 실장 유형 | Through-hole | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Amplifier Architecture | — | Single voltage-feedback operational amplifier |
| Supply Voltage Range | — | ±4.5 V to ±5.5 V |
| Single Supply Equivalent Range | — | 9 V to 11 V |
| Stated Gain Figure | — | 90 dB |
| Operating Current | — | 25 uA |
| 대기 전류 | — | 70 uA |
| 핀 수 | — | 8 pins |
| Terminal Type | — | Through-hole |
| Package Shape | — | Rectangular |
| Temperature Grade | — | Industrial |
| Output Current | — | [DATA_NEEDED: output current] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Noise Voltage Density | — | [DATA_NEEDED: input noise voltage density] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |