OPA642P vs OPA642PB Perbandingan
Perbandingan bersamaan detil OPA642P dari Texas Instruments dan OPA642PB dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | OPA642P | OPA642PB |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Wideband, low-distortion, low-gain operational amplifier | Wideband, low-distortion, low-gain operational amplifier |
| Amplifier Topology | Single voltage-feedback amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 400 MHz | — |
| Tegangan Pemuat | ±5.5 V | — |
| Open-Loop Gain | 95 dB | — |
| Common-Mode Rejection Ratio | 90 dB | — |
| Input Noise Density | 2.7 nV/√Hz | — |
| Low-Distortion Frequency | 5 MHz | — |
| Settling Performance | 12-bit settling to 0.01% | — |
| Arus Output Maximum | ±60 mA | — |
| Paket | 8-pin PDIP | 8-pin PDIP, 0.300 inch (7.62 mm) pitch |
| Jumlah Pin | 8 pins | — |
| Tipe Mounting | Through-hole | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Amplifier Architecture | — | Single voltage-feedback operational amplifier |
| Supply Voltage Range | — | ±4.5 V to ±5.5 V |
| Single Supply Equivalent Range | — | 9 V to 11 V |
| Stated Gain Figure | — | 90 dB |
| Operating Current | — | 25 uA |
| Arus Memerintah | — | 70 uA |
| Jumlah Pin | — | 8 pins |
| Terminal Type | — | Through-hole |
| Package Shape | — | Rectangular |
| Temperature Grade | — | Industrial |
| Output Current | — | [DATA_NEEDED: output current] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Noise Voltage Density | — | [DATA_NEEDED: input noise voltage density] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |