PN7161B1HN-C100Y vs PN7160A1HN Comparison
Detailed side-by-side comparison of PN7161B1HN-C100Y by NXP Semiconductors and PN7160A1HN by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
PN7161B1HN-C100Y - NFC Controller with NCI Interface | NXP
PN7161B1HN-C100Y ✓ Active
Specification Comparison
| Parameter | PN7161B1HN-C100Y | PN7160A1HN |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | RF Transceivers | RF Modules |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $3.74 | $2.15 |
| Function | NFC Controller with NCI interface | — |
| RF Frequency | 13.56 MHz | — |
| Supported Standards | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMVCo | — |
| Host Interface | SPI (NCI) | I2C (default, hardware) / SPI (EEPROM-configurable) |
| Supply Voltage (VDD) | 1.65 V to 1.95 V | — |
| Supply Voltage (VBAT/VIN) | 3.0 V to 3.6 V | — |
| Package | 40-VFQFN Exposed Pad (HVQFN-40, 6 mm x 6 mm) | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Mounting Type | Surface Mount | Surface Mount |
| Moisture Sensitivity Level (MSL) | 3 | — |
| Peak Reflow Temperature | 260 C | 260 C (per JEDEC J-STD-020) |
| Operating Temperature | -40 C to +85 C | -30 C to +85 C |
| EMVCo Compliance | EMV L1 compliant | — |
| Apple ECP Support | Yes (after formal authorization) | — |
| RoHS Status | Compliant | Compliant |
| Lead-Free | Yes | — |
| Protocol | NFCIP-1, NFCIP-2 | — |
| Antenna Outputs | Single-ended TX, differential RX | — |
| Integrated LDO | Yes (RF supply) | — |
| Product Type | — | NFC Plug and Play Controller |
| Operating Frequency | — | 13.56 MHz |
| Supported Protocols | — | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| RF Output Power | — | [DATA_NEEDED: TX output power dBm] |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Moisture Sensitivity Level | — | MSL 3 |